AD-RC03 LED & 3 in 1 control unit

AD-RC03 allows users to uses the 3^rd & 4^th Channel to control LED Lighting, smoke and sound. The users can fully utilize all the advanced functions of AD-RC03 using a 4-channel gun-style RC system.

Features:
- Fully remote operated via a 4 channel transmitter basis
- 5V~6V BEC operate
- Channel 3 (VR / 3-step switch / push button) for LED programming to turn on/off LEDs
- Individual RC switch: Night Mode, Hazard Light, Socket A+B, Pilot Mode, Headlight Half Brightness, Parking Light
- Channel 3 or Steering: Auto / Manual Indicators
- Simulation of real vehicle braking, Indicators light effects
- Reverse sound and lights effects are included
- Brake: Normal / Crawler (Brake light will turn ON 3 seconds whenever the throttle resumes to center)
- User Define "ON" Mode: All the user selected LEDs will be turned on after powering up automatically (Default: All off)
- Support channel 4 (push button) for 4 receiver output signals to control AD-RC Smoke, winch (need an extra controller), light bar (with receiver signal decoder) and ESS One+ horn (press and hold on).
- Advanced features of channel 4: flash headlight, clutch mode (activate throttle without movement)
- User friendly setup mode to program Manual Indicators, Crawler Brake, Beep Selection (backward, beep on/off), Throttle Normal/Reverse, Ch4 Remote Toggle/Hold and Ch4-4 Clutch Setting

PACKING Includes:
Main Unit x1
Y-Cable x1
User Manual x1
LED Wire Assembly x10 (1 Wire with 2 LED)
High Power LED x 1 (1 Wire with 2 LED)

AD-RC03 Smoke Unit

FEATURES
- Suitable for RC model vehicle / ship / tank / train
- Fully automatic calibration and remote operated via 1/2/3 channels
- 4 selectable smoke generation rates for various usages
- 2 wired LEDs for flame simulation and status indication
- 5V~6V BEC and an external battery operated
- Selectable external battery voltage 7.2V or 12V
- The smoke chamber is in all-in-one construction
- Built-in overheat protection
- Environmental friendly smoke oil
- Plenty of smoke can last for 6 minutes on max smoke to 15 minutes on min smoke
- Easy to refill
- Perfectly match with AD-RC03 to emit smoke using a 4-channel transmitter

FUNCTIONS
Channel 3 (Optional)
- Highest priority to determine smoke on, off and following throttle
 Channel 1, Steering (Optional)
- 2nd priority to determine smoke on or off
- Turn on / off smoke if CH3 sets to smoke following throttle and throttle is at neutral
Channel 2, Throttle (Compulsory)
- Follow proportional throttle to emit smoke if CH3 sets to smoke following throttle
  Smoke Generation Rate
- 4 rates are selectable by 2 on-board jumpers
Flame Simulation
- 2 flame simulation patterns i.e. follow throttle and random, are selectable by an on-board jumper
Status Indication
- Show operating status via 2 wired LEDs
Overheat Protection
- Automatically stop the heater if overheat occurs.  Then resume to normal after 1 min
Smoke Outlet
- 2 silicon tubes can be used to guide the smoke path

Package Include:
- Main unit
-Smoke Chamber
-Servo Cable
-7mm Outlet Cap x 2
-7mm Silicon tube x 2
-LED Wire Assembly (1 Wire with 2 LED)
-User Manual

Sense ESS-ONE+ Engine Sound Simulation System

To add sound to this AD-RC03 LED 3 in 1 system you will have to use the Sense Innovation ESS-ONE+. ESS-ONE is a high-performance vehicle engine sound simulation system with strong sound-mixing unit, efficient high- power amplifier and a loudspeaker of optimized acoustic design, presenting perfect and realistic simulation effect.

Features:
- ESS-ONE+ uses advanced DNS/DCR algorithm to reproduce the sound of real engines
- Sound output is real time calculated based on the throttle input and throttle movement speed and Combined with current engine speed to make a sound closest to real engine state
- ESS-ONE+ supports AUX channel that can simulate a variety of sounds such as alarm or special sound can be independent controlled by a 3^rd channel on player’s transmitter. Sound like alarm and horn. Please check RCPLUS sound store for detail list
- ESS-ONE+ has two sets of engine sounds pre-installed
- Two engine sounds enables fast switching between the two sounds
- Players can install two different sounds with different break, turbo, and settings into ESS ONE+ and the sound can be easily one button switch
- ESS-ONE+ supports RC PLUS to realize functional setting and sound purchasing from sound stores
- RCPLUS is a software brand under Sense Innovation and mainly provide function settings to players
- The sound store is also integrated into RCPLUS to servo players. In the future the function will be available on mobile device
- ESS-ONE+ supports firmware updates and function upgrades
- RCPLUS provides permanent firmware update service and software iteration
- Users buy Sense Innovative products are equivalent to have a permanent software upgrade service, not only the RC+ software but the ESS firmware have been updating all the time.

Specification:
- Supply voltage range? 5Volts-26Volts
- Speaker Impedance? 4Ohms
- Output power under 4 Ohms? 20W/3S(12V)
- Number of audio channels? One channel 30W max
- Output is Short-Circuit, Overload and Thermally Protected

Main Functions:
- Capable of simulating the sound of engine start, different throttle speeds, shifting, turning-off, braking, turbo and Rev Limiter (users may need to purchase some sounds before usage
- Engine sound replaceable
- ESS-ONE firmware upgrading
- Battery type selection and low voltage alarm
- 9-grade adjustment of volume

 Specification:
- 30W Power Amplifier
- Supply voltage range of amplifier: 5Volts-25Volts
- Speaker impedance: 4 Ohm
- S-Link interface
- Size:94mm*48mm*30.5mm
- Weight: 88.5g
- Output is short-circuit, overload, over-current and thermally protected

You can find the Online Manual if you need more assistance with the RC Plus app.