Boom Racing Complete Assembled BRX90 Portal PHAT Axles
- Width: 188.3mm / 7.41" pin-to-pin (front and rear)
- Portal gearbox ratio: 1:1
- Weight: 321.8g (front) / 261.6g (rear)
- Portal Gearbox Size: Width: 23.5mm / Height: 30.5mm (21.5mm above shaft / 9mm below)
- Requires 44mm / 1.73" wheel barrel clearance (to clear the entire portal gearbox)
- Additional 15mm / 0.59" ground clearance at the pumpkin over the BRX90 straight axle
- CNC aluminum portal knuckles & covers (front) / lockouts (rear)
- BADASS™ heavy-duty steel front universal (front) / rear driveshafts and portal spindles for ultimate durability and strength for the axle drivetrain
- Four heavy-duty hardened steel metal gears in each portal gearbox
- PHAT axle (heavy and strong) for low CG
- Anti-twist steel brackets (0 Deg) for axle strength
- Reversible axle gear in the housing for counter rotation setup and optional reversed-cut ring and pinion gear available
- Triangular keyed (30/8T) hardened steel AR44 high pinion helical ring and pinion gear with spool
- Chassis Mounted Servo (CMS) or servo-on-axle setup
- CNC aluminum truss included for 3-Link and a 4-Link setup
- Detachable knuckle lever for Behind-The-Axle steering setup option (front)
- Leaf spring over and under the axle housing option
- Compatible with PHAT™ Axle brake disc and caliper (requires optional adapter BRPT005)
- Adjustable caster angle for additional steering adjustability
- High steering angle - over 45 degrees
- Removable third member for 6x6 / 8x8 pass-thru option
- Counter rotation stainless steel steering link for quick adjustments
- Full rubber sealed bearings
- Full 12.9-grade hardware
ByJoel Berones
Tags :Boom Racing, Phat Axles, BRX90, Crawling
Share:http://asiate.es/read?l=JF6GN1_H79S