Miscellaneous   All Parts & Upgrades

 Miscellaneous ZTW 1:10 Scale Sensored ESC Beast SS120A Turbo

Miscellaneous All

Choose ZTW, Choose Quality & Trust!
PART: #ZTW/4212021
OUR INVENTORY:
Out Of Stock
USD $91.99
SALE!
USD $78.6
Best Price Guarantee
 

CUSTOMER REVIEWS

This product currently has 2 reviews

Overall Rating:
100%
0%
0%
0%
0%

Customer Performance Survey:

Customers surveying this product said...

100%"Improves performance"

Currently all feedbacks are left by AsiaTees customers.

TAGGED CATEGORIES:
PRODUCT INFORMATION:
  • ZTW BEAST ESC 120A 1S 1/12 and 1/10 Turbo PRO Series. High current applications finely tuned and tested by the experience Technician. Proven to be top class, reliable and quality made. Featuring enhanced throttle response, brake and throttle linearity. Advance software interface to set up or updating the software to make adjustment on your PC for update. Make detail adjustments .You can make adjustments too using programming card. Featuring Low voltage cut off, overheating protection, throttle signal loss protection. Of course the best for last {TURBO}. Turbo is a short duration burst of top end motor RPM and power-best used sparingly, it is similar in effect to KERS in the current Formula 1 racing cars. featuring support high up to 100.000RPM motors, super fine motor timing tuning. You can check Temperature, voltage, RPM, with P.C .Flash with 10 groups of optimized settings for different applications.

    • Technical Speciation:
    • Model type : Beast SS120A{turbo}
    • Length: 543mm
    • Width: 31mm
    • Height: 30.5mm
    • Weight: 78g
    • Max continuous Current: 120A
    • Burst current: 760A
    • BEC output: 6V/3A
    • Motor type : 4 pole Sensorless brushless motor
    • Battery: 5-10 cell Nixx { NiMH/NiCd} or 2-3S Lipo
    • Resistance: 0.0003ohm
    • Suitable Vehicles: 1:10 on road or off cars and trucks, SCT.
    • POWERING UP THE ESC FOR THE FIRST TIME AND SETTING THE AUTOMATIC THROTTLE CALIBRATION
    • The ZTW ESC features Automatic Throttle Calibration to attain the smoothest throttle response and resolution throughout the entire throttle range of your transmitter. This step is done once to allow the ESC to “learn and memorize” your Transmitter’s throttle output signals and only repeated if you change your transmitter.
    • 1. Switch your Transmitter ON and set the throttle stick to its maximum position.
    • 2. Connect the battery pack , receiver and motor to the ESC. Wait for about 2 seconds, the motor will beep for twice, then put the throttle in the minimum position, the motor will also beep, which indicates that your ESC has got the signal range of the throttle from your transmitter. The throttle calibration is set and your ESC is ready to use.
    • ENTERING THE PROGRAMMING MODE
    • 1. Switch your Transmitter ON and set the throttle to its maximum position.
    • 2. Connect the battery pack to the ESC.
    • 3. Wait until you hear two short beeps (?? ?? ?? ??) confirming that the ESC has now entered the programming mode.2
    • 4. If the throttle stick is left in the maximum position beyond 5 seconds, the ESC will begin the sequence from one function and its associated setting options to another. (Please refer to the table below to cross reference the functions with the audible tones).
    • 5. When the desired tone for the function and setting option is reached, move the throttle stick down to its minimum position. ESC will emit two beeps (**) confirming the new setting has been stored.
    • 6. The ESC only allows the setting of one function at a time. Therefore should you require making changes to other function, disconnect the battery pack and wait 5 seconds to reconnect the battery and repeat the above step
  • Package total weight: 150.00 grams (incl. packaging)
  • Factory description: ZTW ZTW 1:10 Scale Sensored ESC Beast SS120A Turbo
  • Manufactured by ZTW
  • Manufacturer number: ZTW/4212021
  • This item is not eligible for in-store promotions
  • Nobody beats our price! See our Best Price Guarantee, or your money back!
  • Questions about this product? Ask Our Technical Support
  • You may Request Additional Product Information for this product.
  • Looking for screws / bolts to assemble this product? Email Us
View ATees.com Glossary of Terms

Find something wrong in this description?
Help us fix it!
Report An Error

ZTW 1:10 Scale Sensored ESC Beast SS120A Turbo by ZTW


LOADING IMAGES

Part: #ZTW/4212021 (2 customer reviews)
**Discount shipping Applies
USD $91.99
SALE!
USD $78.6
Out Of Stock

Tagged Categories
  • ZTW BEAST ESC 120A 1S 1/12 and 1/10 Turbo PRO Series. High current applications finely tuned and tested by the experience Technician. Proven to be top class, reliable and quality made. Featuring enhanced throttle response, brake and throttle linearity. Advance software interface to set up or updating the software to make adjustment on your PC for update. Make detail adjustments .You can make adjustments too using programming card. Featuring Low voltage cut off, overheating protection, throttle signal loss protection. Of course the best for last {TURBO}. Turbo is a short duration burst of top end motor RPM and power-best used sparingly, it is similar in effect to KERS in the current Formula 1 racing cars. featuring support high up to 100.000RPM motors, super fine motor timing tuning. You can check Temperature, voltage, RPM, with P.C .Flash with 10 groups of optimized settings for different applications.

    • Technical Speciation:
    • Model type : Beast SS120A{turbo}
    • Length: 543mm
    • Width: 31mm
    • Height: 30.5mm
    • Weight: 78g
    • Max continuous Current: 120A
    • Burst current: 760A
    • BEC output: 6V/3A
    • Motor type : 4 pole Sensorless brushless motor
    • Battery: 5-10 cell Nixx { NiMH/NiCd} or 2-3S Lipo
    • Resistance: 0.0003ohm
    • Suitable Vehicles: 1:10 on road or off cars and trucks, SCT.
    • POWERING UP THE ESC FOR THE FIRST TIME AND SETTING THE AUTOMATIC THROTTLE CALIBRATION
    • The ZTW ESC features Automatic Throttle Calibration to attain the smoothest throttle response and resolution throughout the entire throttle range of your transmitter. This step is done once to allow the ESC to “learn and memorize” your Transmitter’s throttle output signals and only repeated if you change your transmitter.
    • 1. Switch your Transmitter ON and set the throttle stick to its maximum position.
    • 2. Connect the battery pack , receiver and motor to the ESC. Wait for about 2 seconds, the motor will beep for twice, then put the throttle in the minimum position, the motor will also beep, which indicates that your ESC has got the signal range of the throttle from your transmitter. The throttle calibration is set and your ESC is ready to use.
    • ENTERING THE PROGRAMMING MODE
    • 1. Switch your Transmitter ON and set the throttle to its maximum position.
    • 2. Connect the battery pack to the ESC.
    • 3. Wait until you hear two short beeps (?? ?? ?? ??) confirming that the ESC has now entered the programming mode.2
    • 4. If the throttle stick is left in the maximum position beyond 5 seconds, the ESC will begin the sequence from one function and its associated setting options to another. (Please refer to the table below to cross reference the functions with the audible tones).
    • 5. When the desired tone for the function and setting option is reached, move the throttle stick down to its minimum position. ESC will emit two beeps (**) confirming the new setting has been stored.
    • 6. The ESC only allows the setting of one function at a time. Therefore should you require making changes to other function, disconnect the battery pack and wait 5 seconds to reconnect the battery and repeat the above step
  • Product weight: 150.00 grams
  • Factory description: ZTW ZTW 1:10 Scale Sensored ESC Beast SS120A Turbo
  • Manufactured by ZTW
  • Manufacturer number: ZTW/4212021
  • This item is not eligible for in-store promotions
  • Nobody beats our price! See our Best Price Guarantee, or your money back!
  • Questions about this product? Ask Our Technical Support
  • You may Request Additional Product Information for this product.
  • Looking for screws / bolts to assemble this product? Email Us
View ATees.com Glossary of Terms
Find something wrong in this description?
Help us fix it!
Report An Error

This product currently has 2 reviews

Overall Rating:
100%
0%
0%
0%
0%

Customer Performance Survey:

Customers surveying this product said...

100%"Improves performance"

Currently all feedbacks are left by AsiaTees customers.

The Miscellaneous All ZTW 1:10 Scale Sensored ESC Beast SS120A Turbo has an average rating of stars based on 2 customer reviews.

  • 1039 people found this review helpful August 21, 2014
    Carlos from Brazil

    Recommend buying a power plant! But very complicated to set up.

    overall
    FIT & FINISH
    DESIGN
    Was this review helpful? Yes
  • 280 people found this review helpful May 29, 2014
    Rodney from USA

    Great speed control, easy to use and delivers the power you need.

    overall
    FIT & FINISH
    DESIGN
    Was this review helpful? Yes
Choose ZTW, Choose Quality & Trust!
Choose ZTW, Choose Quality & Trust!
ZTW Model was established in 2007, committing themselves to electronic power system for RC models. As an integrated enterprise with the ability to research & develop, produce and sell, their products have been selling well all over the 60 countries and districts in the world, which makes ZTW the most competitive brand and OEM enterprise through global RC lines. Its brushless ESC for car, boat, and helicopter & airplane are comparable to world famous brands especially in terms of performance in compatibility, reliability and stability.

To select ZTW is to select quality & trust. All products available at the largest online RC store.

Recent Customer Reviews - 2 Reviews Total  

The Miscellaneous All ZTW 1:10 Scale Sensored ESC Beast SS120A Turbo has an average rating of stars based on 2 customer reviews.

  • 1039 people found this review helpful August 21, 2014
    Carlos from Brazil

    Recommend buying a power plant! But very complicated to set up.

    overall
    FIT & FINISH
    DESIGN
    Was this review helpful? Yes
    Miscellaneous All ZTW 1:10 Scale Sensored ESC Beast SS120A Turbo by ZTW
  • 280 people found this review helpful May 29, 2014
    Rodney from USA

    Great speed control, easy to use and delivers the power you need.

    overall
    FIT & FINISH
    DESIGN
    Was this review helpful? Yes
    Miscellaneous All ZTW 1:10 Scale Sensored ESC Beast SS120A Turbo by ZTW

About ZTW

Choose ZTW, Choose Quality & Trust!
Choose ZTW, Choose Quality & Trust!
ZTW Model was established in 2007, committing themselves to electronic power system for RC models. As an integrated enterprise with the ability to research & develop, produce and sell, their products have been selling well all over the 60 countries and districts in the world, which makes ZTW the most competitive brand and OEM enterprise through global RC lines. Its brushless ESC for car, boat, and helicopter & airplane are comparable to world famous brands especially in terms of performance in compatibility, reliability and stability.

To select ZTW is to select quality & trust. All products available at the largest online RC store.

Back To Top