D90 Metal Chassis Kit. Front 3-link setup with CMS and Panhard mount. Rear runs links as well. These three new kits come unassembled.
Includes Team Raffee Co. Scale Axles, steel front and rear driveshafts, transmission, T-case, aluminum links, HD gears, battery plate, mounts, skid plate, bumpers, shock towers and receiver box. Does not come with shocks, wheels and tires.
Recommended shocks length 80mm to 90mm and 1.9 wheels with tires not exceeding 96mm.
This combo comes with Team Raffee Co. body D90 Pickup body.
Specification:
Scale 1:10
Comes with Team Raffee Co. Scale Axles
Over 45-degree steering angle
27/10T heavy-duty helical axle gears and input shafts
Heavy Cast Knuckles
Overall length (bumper to bumper): 434mm
Wheelbase: variable 282-287 mm
Frame width: 85mm (outside) 73mm (inside)
Front bumper width: 195mm
Rear bumper width: 190mm
Body post width: 190mm
Body post distance hole to hole: 138mm
Mainly all parts in 6061 alloys assembled
Full metal internal gears in axles
Full metal internal gears in the transmission
Full metal internal gears in the transfer case
HD universal driveshafts
Aluminum M3 upper and lower links, drag link, and Panhard link
Stainless steel steering tie rod link
4x cast metal adjustable shock mounts
4x aluminum shock extension
1x helical pinion gear
1x helical main gear
4x 12mm aluminum hex
Full ball bearings
Includes:
D90 Chassis (without tires/wheels/shocks)
Defender D90 Pickup Body
To complete this chassis you will need:
2-channel radio system
Steering servo
Electronic Speed Controller (ESC)
Motor
Battery & Charger
Wheels & Tires
Shocks
Directions: When you receive the car, do not put electronics and battery on it immediately and run it immediately. Inspect the vehicle and take it apart, including the axles, which you need to shim them and grease them properly. Check all of the screws to make sure they are tightened and nothing is loose.
Note: The photo is for reference only. Accessories are extra options. The body comes unpainted. Price includes body and chassis. Electronics are not included.
Package total weight: 4380.00 grams (incl. packaging)
Package size: 26.00 x 48.00 x 40.00cm
Factory description: Team Raffee Co. 1/10 Defender D90 Chassis Kit With TRC Raffee Pickup Hard Body
D90 Metal Chassis Kit. Front 3-link setup with CMS and Panhard mount. Rear runs links as well. These three new kits come unassembled.
Includes Team Raffee Co. Scale Axles, steel front and rear driveshafts, transmission, T-case, aluminum links, HD gears, battery plate, mounts, skid plate, bumpers, shock towers and receiver box. Does not come with shocks, wheels and tires.
Recommended shocks length 80mm to 90mm and 1.9 wheels with tires not exceeding 96mm.
This combo comes with Team Raffee Co. body D90 Pickup body.
Specification:
Scale 1:10
Comes with Team Raffee Co. Scale Axles
Over 45-degree steering angle
27/10T heavy-duty helical axle gears and input shafts
Heavy Cast Knuckles
Overall length (bumper to bumper): 434mm
Wheelbase: variable 282-287 mm
Frame width: 85mm (outside) 73mm (inside)
Front bumper width: 195mm
Rear bumper width: 190mm
Body post width: 190mm
Body post distance hole to hole: 138mm
Mainly all parts in 6061 alloys assembled
Full metal internal gears in axles
Full metal internal gears in the transmission
Full metal internal gears in the transfer case
HD universal driveshafts
Aluminum M3 upper and lower links, drag link, and Panhard link
Stainless steel steering tie rod link
4x cast metal adjustable shock mounts
4x aluminum shock extension
1x helical pinion gear
1x helical main gear
4x 12mm aluminum hex
Full ball bearings
Includes:
D90 Chassis (without tires/wheels/shocks)
Defender D90 Pickup Body
To complete this chassis you will need:
2-channel radio system
Steering servo
Electronic Speed Controller (ESC)
Motor
Battery & Charger
Wheels & Tires
Shocks
Directions: When you receive the car, do not put electronics and battery on it immediately and run it immediately. Inspect the vehicle and take it apart, including the axles, which you need to shim them and grease them properly. Check all of the screws to make sure they are tightened and nothing is loose.
Note: The photo is for reference only. Accessories are extra options. The body comes unpainted. Price includes body and chassis. Electronics are not included.
Product weight: 4380.00 grams
Package size: 26.00 x 48.00 x 40.00cm
Factory description: Team Raffee Co. 1/10 Defender D90 Chassis Kit With TRC Raffee Pickup Hard Body
The RC Hardware That You Can Trust Team Raffee Co. is a new and motivated company that will take the world by storm. An excellent brand that provides reliable hardware, upgrades, and parts for some of the top brands out there.
Team Raffee Co. fully stands behind their products. They trust the quality of their material and believe that every single detail on their parts will make a difference to the user experience. We're inclined to agree with them.
The RC Hardware That You Can Trust Team Raffee Co. is a new and motivated company that will take the world by storm. An excellent brand that provides reliable hardware, upgrades, and parts for some of the top brands out there.
Team Raffee Co. fully stands behind their products. They trust the quality of their material and believe that every single detail on their parts will make a difference to the user experience. We're inclined to agree with them.
ATees.com uses cookies and similar technologies. By using ATees.com, you are agreeing to our revised Privacy Policy and Terms and Conditions, including our Cookie Policy.