Miscellaneous
|
||||
Prev 
Next
Showing #8115 of All Parts
LOADING IMAGES
|
PART: #JC/0455
|
**Discount shipping applies to this item.
This is a stackable item. We will stack multiples on each other to save you shipping.
This is a stackable item. We will stack multiples on each other to save you shipping.
|
|
|||||||||||||||||||||
CUSTOMER REVIEWS
This product currently has 0 reviews
Currently all feedbacks are left by AsiaTees customers.
| Quantity Discount | |||
|---|---|---|---|
| Units at this Price | ATees' Low Price (Per Unit) |
You Save | Click To Order |
TAGGED CATEGORIES:
- JConcepts begins to stretch its legs in the Drag Racing scene with the introduction of the new Pontiac Firebird. The new 1968 styled body dubbed, “The Machine” has been an immediate hit on and off the race track and prototyped and driven by JConcepts drivers across the United States. The new body shell protrudes confidence with its low-profile stature, super low Firebird V-nose, built-in front splitter and crowned shaped hood line.
The Firebird has a long silhouette allowing an even displacement of downforce over the front and rear end helping the body gain grip where needed. When a driver makes initial throttle response, the over-hang in the rear and built-in rear side-dams help the vehicle gain forward traction and launch stability. Getting up to speed with “The Machine” is possible with the low-slung roof-line which handles the at-speed handling. The large lay-down front windshield cuts through the wind like a fighter jet while the recessed side-windows provide just enough visibility for a Pro Mod.
The front-end of the body is important to maximize the MPH and elapsed time during any pass. The heavy front-end rake allows the vehicle to hold tight on the “big end” of the race track. With just enough clearance to fit over most front suspension components, “The Machine” hangs tough in performance and aesthetics. A slight hood-scoop runs the center-line of the body over the crowned hood which makes perfect space for painting decoration or sponsor decals.
The recessed front-end looks complete by adding included headlight, grille and duct decals to highlight a branded area of the body. Drop below the grille to the built-in splitter, trim to the lowest cutline to cut through the air with accuracy. Small wheel wells close up large gaps around the tires and an ultra-low cutline on the rocker panel area allows the body to have a low drape effect. The final feature, the long roof-line extended to the trunk section blends into a built-in gurney type wing for downforce even without adding additional wings or aerodynamics.
The JConcepts body includes overspray film on top of the body, window mask for quick paint and prep and detailed Pontiac Firebird / JConcepts decal sheet. The product is always backed by JConcepts customer service, supported, and developed by professionals with style and authenticity.
Features:- Officially licensed by GM to JConcepts
- Body measures 11.00" in width and 13" wheelbase
- Fits a variety of platforms including DR10, Losi 22S, and Drag Slash
- Scale inspired body, cab, and window design
- 1:1 headlight and grill treatment
- Clear heavy-duty polycarbonate with protective film
- Window masks and detailed Pontiac Firebird / JConcepts decal sheet
Fits:
- DR10
- 22S
- Drag Slash - 11.00" width & 13" wheelbase
Drag Slash requires the following additional Traxxas parts (not included)
Part number: TRA3619 and TRA2579 - Package total weight: 400.00 grams (incl. packaging)
- Package size: 33.00 x 66.00 x 15.00cm
- Save now! This item will be stacked together when you order multiples to save you shipping.
- Factory description: JConcepts 1968 Pontiac Firebird Pro - The Machine
- Manufactured by JConcepts
- Manufacturer number: JC/0455
- This item is eligible for in-store promotions
- Nobody beats our price! See our Best Price Guarantee, or your money back!
- Questions about this product? Ask Our Technical Support
- You may Request Additional Product Information for this product.
- Looking for screws / bolts to assemble this product? Email Us
Find something wrong in this description?
Help us fix it! Report An Error
1968 Pontiac Firebird Pro - The Machine by JConcepts
LOADING IMAGES
Part:
#JC/0455
**Discount shipping Applies
This is a stackable item. We will stack multiples on each other to save you shipping.
This is a stackable item. We will stack multiples on each other to save you shipping.
|
| |
Tagged Categories
- JConcepts begins to stretch its legs in the Drag Racing scene with the introduction of the new Pontiac Firebird. The new 1968 styled body dubbed, “The Machine” has been an immediate hit on and off the race track and prototyped and driven by JConcepts drivers across the United States. The new body shell protrudes confidence with its low-profile stature, super low Firebird V-nose, built-in front splitter and crowned shaped hood line.
The Firebird has a long silhouette allowing an even displacement of downforce over the front and rear end helping the body gain grip where needed. When a driver makes initial throttle response, the over-hang in the rear and built-in rear side-dams help the vehicle gain forward traction and launch stability. Getting up to speed with “The Machine” is possible with the low-slung roof-line which handles the at-speed handling. The large lay-down front windshield cuts through the wind like a fighter jet while the recessed side-windows provide just enough visibility for a Pro Mod.
The front-end of the body is important to maximize the MPH and elapsed time during any pass. The heavy front-end rake allows the vehicle to hold tight on the “big end” of the race track. With just enough clearance to fit over most front suspension components, “The Machine” hangs tough in performance and aesthetics. A slight hood-scoop runs the center-line of the body over the crowned hood which makes perfect space for painting decoration or sponsor decals.
The recessed front-end looks complete by adding included headlight, grille and duct decals to highlight a branded area of the body. Drop below the grille to the built-in splitter, trim to the lowest cutline to cut through the air with accuracy. Small wheel wells close up large gaps around the tires and an ultra-low cutline on the rocker panel area allows the body to have a low drape effect. The final feature, the long roof-line extended to the trunk section blends into a built-in gurney type wing for downforce even without adding additional wings or aerodynamics.
The JConcepts body includes overspray film on top of the body, window mask for quick paint and prep and detailed Pontiac Firebird / JConcepts decal sheet. The product is always backed by JConcepts customer service, supported, and developed by professionals with style and authenticity.
Features:- Officially licensed by GM to JConcepts
- Body measures 11.00" in width and 13" wheelbase
- Fits a variety of platforms including DR10, Losi 22S, and Drag Slash
- Scale inspired body, cab, and window design
- 1:1 headlight and grill treatment
- Clear heavy-duty polycarbonate with protective film
- Window masks and detailed Pontiac Firebird / JConcepts decal sheet
Fits:
- DR10
- 22S
- Drag Slash - 11.00" width & 13" wheelbase
Drag Slash requires the following additional Traxxas parts (not included)
Part number: TRA3619 and TRA2579 - Product weight: 400.00 grams
- Package size: 33.00 x 66.00 x 15.00cm
- Save now! This item will be stacked together when you order multiples to save you shipping.
- Factory description: JConcepts 1968 Pontiac Firebird Pro - The Machine
- Manufactured by JConcepts
- Manufacturer number: JC/0455
- This item is eligible for in-store promotions
- Nobody beats our price! See our Best Price Guarantee, or your money back!
- Questions about this product? Ask Our Technical Support
- You may Request Additional Product Information for this product.
- Looking for screws / bolts to assemble this product? Email Us
Find something wrong in this description?
Help us fix it! Report An Error
| Quantity Discount | |||
|---|---|---|---|
| Units at this Price | ATees' Low Price (Per Unit) |
You Save | Click To Order |
For the month of December, choose FedEx or DHL delivery and take 20% off shipping.