• 1/8th brushless power system with the implementation of a pure signal sensor mode circuit
  • The built-in intelligent integrated circuit is used so the sensor unit can easily be identified by the ESC
  • when pairing with Hobbywing's XeRun XR8 series of ESC's the motor will operate in “Pure Sensored”
  • mode at all times, providing better performance and a smoother throttle response.
  • Please Note: When the G3 Series motors are paired with XR8 Pro G2 ESC the turbo feature can be set to the maximum of 48º
• The efficiency is improved greatly, effectively reducing the temperature increase
  • Compared with XERUN 4268/4274 G2, the motor structure is greatly optimized, the efficiency is improved by 6% or more, which reduces the motor temperature increase effectively (Reducing thermal runaway).
• The G3 Series is Fail-Safe and reliable using Hobbywing's new motor Hall sensor technology
  • The motor sensor system adopts patented technology of "error-free" Hall sensor technology, with an independent high-speed and high-precision encoder of which will always output a pure and accurate rotor position signal, which effectively will isolate any external interference which is known to cause errors of the sensor signal. This accurate sensor system will allow the motor to function at its peak performance in a very stable sensor state
• Lightweight
  • The design of 4268SD G3 is optimized which reduces the overall weight of the motor. The weight of 1900KV / 2200KV is 315g / 285g respectively. And the weight of the 4268 motor is 330g, 1900kv / 2200kv is 20g / 45g lighter than peers. The lightweight motor is convenient for the driver to adjust the balance performance of the vehicle.
• Advanced material in the industry and outstanding product design

It was made out of a single piece of 7075 aluminum bar processed by precision CNC. The CNC Stator case has zero gaps or any screws on the surface of the Can body. There is a silicone dustproof ring seal that surrounds the sensor base. The details show originality. 
The front case bell contains two pairs of M3 and two pairs of M4 screw holes, which are suitable for various mounting bases.
The outlet terminals use a widened U-shaped/90° gold-plated curved copper contacts, which have a very low internal resistance which also makes soldering wires to the terminal ease.
The R-class insulation material is rated at 240 ° C, the special high-strength adhesive is rated at 340 ° C, and high-quality international well-known branded low friction bearings are used to handle extreme loads.

• KV: 2250KV
• Pole: 4
• LiPo: 2S-6S
• No-load current (A): 5.4
• Size: O.D 42mm Length: 74mm
• Shaft dia: 5mm
• Weight: 354g