Dispatches in 3 to 5 daysThis product usually dispatches in 3 to 5 days from our warehouse. Once this item is shipped the normal shipping time applies. Your order with other "In Stock And Ready To Ship" products will be shipped together in one shipment. You will be notified immediately in case of any delay. If the product is unavailable a refund will be returned to your original payment. Please allow for an extra day if your order is placed on the weekend.
Serpent 190mm 1/10 scale ready-to-Race Touringcar, based on the successful 411 race-cars. Factory assembled, with race-wheel-tyres, pre-cut and prepainted body, Dragon-RC electronic speedo, Dragon-RC brushless 9T motor, Dragon-RC DTS-3 2.4ghZ transmitter. The full package to start racing in the electric touringcar category or just race anywhere for fun.
Features:
Chassis Supernarrow, symmetrical , durable black glass-fibre chassisplate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for geardiff, spool and spur.
Topdeck Durable black glass-fibre topdeck with optimised flex design. Battery-mount brackets and Lipo-holders Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The Lipoholders will securely keep the Lipo in place, also at hard impact.
Servo-mount The servo is mounteded on a seperate plate, so flex is less influenced.
Shocktower front Black glass fibre shocktower with 3 upper shock mounting holes to choose from . Holes for an extra central bodypost are already made as well.
Front bracket Machined alumnium front brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon.
Front suspension Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.
C-hub / steeringblock The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheelguidance without chatter.
Shocktower rear Black glass fibre shocktower with 4 upper shock mounting holes to choose from . The rear bodyposts are mounted to the top of the rear shocktower.
Rear bracket Machined alumnium rear brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR RR and split type 0.0 blocks RR FR
Rear suspension Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.
Rear upright Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels.
Middle shaft Ballraced middle shaft with 2 small pully’s and the main Serpent spur gear.
Bumper Large foam front bumper captured by a upper and lower nylon bumper
Bodymount Front bodymount is mounted trhrough the front bumper, and the rear ones are seated on the shocktower. Multiple bodyposiiton holes to choose from.
Gear-diff Very compact ballraced geardifferential in the rear, with steel gears and axles for durablity. Supersmooth.
Spool Front nylon lightweight spool with screw mounted front gearpully
Transmission / belts / pullies Smooth low friction fine pitch belts combined with optimised nylon pullys
Driveshaft / wheelhex / wheelaxle Steel driveshafts, combined with ballraced wheelaxles and nylon wheel-hex adaptors
Steering system Steering system with optimised ackermann for neutral steering-feeling.
Shockabsorbers Latest type RCM competition shockabsorbers with membrames and checked colorcoded race springs.
Ball-bearings Fully ballraced with oiled high speed sealed stainless steel bearings.
Tyres-wheels The 411-RTR is fitted with Dragon-RC rubber racing tyres with foam inlays on Serpent TC wheels for super-grip.
Body: The EFRA approved 1/10 scale Serpent TC body Lex-is fitted, fully pre-cut and prepainted in a superb paintjob with 4 colors.
Manual and decals: Full color owners manual with info on car and electronics, has all exploded views for easy parts-finding and detailed list with spare parts and optionals. Decal-sheet with Serpent and 411 logo’s are included as well.
Packing The 411 RTR comes in a strong carton box with full color printing.
Optionals / upgrading The Serpent 411 Sport is based on the high end race version of the 411. All parts from the 411 race-version and also all optionals, alsof fit the 411 Sport. This allows you to upgrade your 411 Sport to a higher level race spec step by step, with the parts you select. The 411 Sport parts manual shows those parts, and you can find them in the optionals section of the 411 Sport as well.
Electronics
The 411 RTR comes with - Dragon-RC electronic 35A speedcontroller - Dragon-RC brushless motor 9T 3000 kv, non sensored
Transmitter / receiver / servo - Dragon-RC DTS-3 digital 2.4 gHz transmitter - Dragon-RC digital receiver in 2.4 gHz - Dragon-Rc digital servo 0.13s - 6kg
The Serpent 411 Ready-to-race offers a complete package to enjoy running anywhere outdoors on even surfaces / parkinglots or even join any indoor or outdoor race.
Package total weight: 3300.00 grams (incl. packaging)
Serpent 190mm 1/10 scale ready-to-Race Touringcar, based on the successful 411 race-cars. Factory assembled, with race-wheel-tyres, pre-cut and prepainted body, Dragon-RC electronic speedo, Dragon-RC brushless 9T motor, Dragon-RC DTS-3 2.4ghZ transmitter. The full package to start racing in the electric touringcar category or just race anywhere for fun.
Features:
Chassis Supernarrow, symmetrical , durable black glass-fibre chassisplate with optimised flex design, countersunk holes, central section holes all perfectly in center, pockets for geardiff, spool and spur.
Topdeck Durable black glass-fibre topdeck with optimised flex design. Battery-mount brackets and Lipo-holders Easy to use nylon batter tape holder, which allow the battery tape to run over instead of under the chassis. The holders can be reversed for other battery position. The Lipoholders will securely keep the Lipo in place, also at hard impact.
Servo-mount The servo is mounteded on a seperate plate, so flex is less influenced.
Shocktower front Black glass fibre shocktower with 3 upper shock mounting holes to choose from . Holes for an extra central bodypost are already made as well.
Front bracket Machined alumnium front brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon.
Front suspension Durable lower front wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.
C-hub / steeringblock The c-hub type front system creates a super precise steering feeling with great feedback, and strong wheelguidance without chatter.
Shocktower rear Black glass fibre shocktower with 4 upper shock mounting holes to choose from . The rear bodyposts are mounted to the top of the rear shocktower.
Rear bracket Machined alumnium rear brackets, with belt tension adjusting through excenters. Suspension brackets in durable nylon with 3.0 RR RR and split type 0.0 blocks RR FR
Rear suspension Durable lower rear wishbones connected to the inner brackets with strong steel pivot pins. An anti-roll bar system can be mounted as option.
Rear upright Strong rear uprights with 2 upper positions, for perfect guidance of the rear wheels.
Middle shaft Ballraced middle shaft with 2 small pully’s and the main Serpent spur gear.
Bumper Large foam front bumper captured by a upper and lower nylon bumper
Bodymount Front bodymount is mounted trhrough the front bumper, and the rear ones are seated on the shocktower. Multiple bodyposiiton holes to choose from.
Gear-diff Very compact ballraced geardifferential in the rear, with steel gears and axles for durablity. Supersmooth.
Spool Front nylon lightweight spool with screw mounted front gearpully
Transmission / belts / pullies Smooth low friction fine pitch belts combined with optimised nylon pullys
Driveshaft / wheelhex / wheelaxle Steel driveshafts, combined with ballraced wheelaxles and nylon wheel-hex adaptors
Steering system Steering system with optimised ackermann for neutral steering-feeling.
Shockabsorbers Latest type RCM competition shockabsorbers with membrames and checked colorcoded race springs.
Ball-bearings Fully ballraced with oiled high speed sealed stainless steel bearings.
Tyres-wheels The 411-RTR is fitted with Dragon-RC rubber racing tyres with foam inlays on Serpent TC wheels for super-grip.
Body: The EFRA approved 1/10 scale Serpent TC body Lex-is fitted, fully pre-cut and prepainted in a superb paintjob with 4 colors.
Manual and decals: Full color owners manual with info on car and electronics, has all exploded views for easy parts-finding and detailed list with spare parts and optionals. Decal-sheet with Serpent and 411 logo’s are included as well.
Packing The 411 RTR comes in a strong carton box with full color printing.
Optionals / upgrading The Serpent 411 Sport is based on the high end race version of the 411. All parts from the 411 race-version and also all optionals, alsof fit the 411 Sport. This allows you to upgrade your 411 Sport to a higher level race spec step by step, with the parts you select. The 411 Sport parts manual shows those parts, and you can find them in the optionals section of the 411 Sport as well.
Electronics
The 411 RTR comes with - Dragon-RC electronic 35A speedcontroller - Dragon-RC brushless motor 9T 3000 kv, non sensored
Transmitter / receiver / servo - Dragon-RC DTS-3 digital 2.4 gHz transmitter - Dragon-RC digital receiver in 2.4 gHz - Dragon-Rc digital servo 0.13s - 6kg
The Serpent 411 Ready-to-race offers a complete package to enjoy running anywhere outdoors on even surfaces / parkinglots or even join any indoor or outdoor race.
The Racing Experience Serpent has been around for more than 30 years and it was founded by Berton BV, which is named the two founders, Pieter Bervoets and Ron Ton, which both were RC car racers. The pair built their first RC car in 1972, using a Kyosho Dash 1 chassis modified by themselves. In 1977, the duo started to develop their first car under the Serpent name in 1977 and in 1979, both Bervoets and Ton had won separate EFRA 1:8 titles with their Mk. III Pro.
Despite the broken road that Serpent has been on, they've got team drivers from Europe, US, and Asia, taking 9 world titles, and 37 European titles altogether, plus a number of nationals. Its line of products specializes mainly in 1/8 and 1/10 scale for buggies, touring, and pan cars.
It's Serpent's goal to create great products, which offer a truly great racing experience. Experience racing, race Serpent! All Serpent products are available at the largest online rc store.
The Racing Experience Serpent has been around for more than 30 years and it was founded by Berton BV, which is named the two founders, Pieter Bervoets and Ron Ton, which both were RC car racers. The pair built their first RC car in 1972, using a Kyosho Dash 1 chassis modified by themselves. In 1977, the duo started to develop their first car under the Serpent name in 1977 and in 1979, both Bervoets and Ton had won separate EFRA 1:8 titles with their Mk. III Pro.
Despite the broken road that Serpent has been on, they've got team drivers from Europe, US, and Asia, taking 9 world titles, and 37 European titles altogether, plus a number of nationals. Its line of products specializes mainly in 1/8 and 1/10 scale for buggies, touring, and pan cars.
It's Serpent's goal to create great products, which offer a truly great racing experience. Experience racing, race Serpent! All Serpent products are available at the largest online rc store.
ATees.com uses cookies and similar technologies. By using ATees.com, you are agreeing to our revised Privacy Policy and Terms and Conditions, including our Cookie Policy.
For the month of December, choose FedEx or DHL delivery and take 20% off shipping.