-
275 people found this review helpful May 10, 2015overallFIT & FINISHDESIGNWas this review helpful? Yes
-
597 people found this review helpful April 29, 2015
The beast is a good esc.
overallFIT & FINISHDESIGNWas this review helpful? Yes -
229 people found this review helpful March 29, 2015overallFIT & FINISHDESIGNWas this review helpful? Yes
Miscellaneous All Parts & UpgradesMiscellaneous ZTW 1:10 Scale Sensorless ESC Beast SL 45A |
||||
This product currently has 3 reviews
Overall Rating:
|
Customer Performance Survey:
Customers surveying this product said...
100%"Improves performance"
Currently all feedbacks are left by AsiaTees customers.
- ZTW BEAST ESC truck and car.
High current applications finely tuned and tested by the experience Technician. proven to be top class, reliable and quality made . Featuring Enhanced throttle response, brake and throttle linearity. Advance software interface to set up or updating the software to make adjustment on your PC for update. make detail adjustments .you can make adjustments too using programming card. Featuring Low voltage cut off, overheating protection, throttle signal loss protection. MOSFET design provide high current output {1080 amp peaks} with low resistance {.0003 Ohm} Micro-fin aluminum heat sink and water proof. ZTW are compatible with NOVAK, LRP,ORION Sensored brushless motor.
TECHNICAL SPECIFICATION:- Model type: Beast SL45A
- Length:44mm
- Width:32mm
- Height:37mm
- Weight:95g
- Max continuous Current:45A
- Burst current:260A
- BEC output:6V/2A
- Motor type:4 pole Sensorless brushless motor
- Battery:5-10 cell Nixx { NiMH/NiCd}2-3S Lipo
- Suitable Vehicles:1:10 on road or off cars and trucks, SCT.
- Operate Environment:waterproof design
POWERING UP THE ESC FOR THE FIRST TIME AND SETTING THE AUTOMATIC THROTTLE CALIBRATION- The ZTW ESC features Automatic Throttle Calibration to attain the smoothest throttle response and resolution throughout the entire throttle range of your transmitter. This step is done once to allow the ESC to “learn and memorize” your Transmitter’s throttle output signals and only repeated if you change your transmitter.
- 1. Switch your Transmitter ON and set the throttle stick to its maximum position.
- 2. Connect the battery pack , receiver and motor to the ESC. Wait for about 2 seconds, the motor will beep for twice, then put the throttle in the minimum position, the motor will also beep, which indicates that your ESC has got the signal range of the throttle from your transmitter. The throttle calibration is set and your ESC is ready to use.
ENTERING THE PROGRAMMING MODE
- 1.Switch your Transmitter ON and set the throttle to its maximum position.
- 2.Connect the battery pack to the ESC.
- 3. Wait until you hear two short beeps (?? ?? ?? ??) confirming that the ESC has now entered the programming mode.2
- 4. If the throttle stick is left in the maximum position beyond 5 seconds, the ESC will begin the sequence from one function and its associated setting options to another. (Please refer to the table below to cross reference the functions with the audible tones).
- 5. When the desired tone for the function and setting option is reached, move the throttle stick down to its minimum position. ESC will emit two beeps (**) confirming the new setting has been stored.
- 6. The ESC only allows the setting of one function at a time. Therefore should you require making changes to other function, disconnect the battery pack and wait 5 seconds to reconnect the battery and repeat the above step
Find something wrong in this description?
Help us fix it! Report An Error
ZTW 1:10 Scale Sensorless ESC Beast SL 45A by ZTW
- ZTW BEAST ESC truck and car.
High current applications finely tuned and tested by the experience Technician. proven to be top class, reliable and quality made . Featuring Enhanced throttle response, brake and throttle linearity. Advance software interface to set up or updating the software to make adjustment on your PC for update. make detail adjustments .you can make adjustments too using programming card. Featuring Low voltage cut off, overheating protection, throttle signal loss protection. MOSFET design provide high current output {1080 amp peaks} with low resistance {.0003 Ohm} Micro-fin aluminum heat sink and water proof. ZTW are compatible with NOVAK, LRP,ORION Sensored brushless motor.
TECHNICAL SPECIFICATION:- Model type: Beast SL45A
- Length:44mm
- Width:32mm
- Height:37mm
- Weight:95g
- Max continuous Current:45A
- Burst current:260A
- BEC output:6V/2A
- Motor type:4 pole Sensorless brushless motor
- Battery:5-10 cell Nixx { NiMH/NiCd}2-3S Lipo
- Suitable Vehicles:1:10 on road or off cars and trucks, SCT.
- Operate Environment:waterproof design
POWERING UP THE ESC FOR THE FIRST TIME AND SETTING THE AUTOMATIC THROTTLE CALIBRATION- The ZTW ESC features Automatic Throttle Calibration to attain the smoothest throttle response and resolution throughout the entire throttle range of your transmitter. This step is done once to allow the ESC to “learn and memorize” your Transmitter’s throttle output signals and only repeated if you change your transmitter.
- 1. Switch your Transmitter ON and set the throttle stick to its maximum position.
- 2. Connect the battery pack , receiver and motor to the ESC. Wait for about 2 seconds, the motor will beep for twice, then put the throttle in the minimum position, the motor will also beep, which indicates that your ESC has got the signal range of the throttle from your transmitter. The throttle calibration is set and your ESC is ready to use.
ENTERING THE PROGRAMMING MODE
- 1.Switch your Transmitter ON and set the throttle to its maximum position.
- 2.Connect the battery pack to the ESC.
- 3. Wait until you hear two short beeps (?? ?? ?? ??) confirming that the ESC has now entered the programming mode.2
- 4. If the throttle stick is left in the maximum position beyond 5 seconds, the ESC will begin the sequence from one function and its associated setting options to another. (Please refer to the table below to cross reference the functions with the audible tones).
- 5. When the desired tone for the function and setting option is reached, move the throttle stick down to its minimum position. ESC will emit two beeps (**) confirming the new setting has been stored.
- 6. The ESC only allows the setting of one function at a time. Therefore should you require making changes to other function, disconnect the battery pack and wait 5 seconds to reconnect the battery and repeat the above step
Find something wrong in this description?
Help us fix it! Report An Error
This product currently has 3 reviews
Overall Rating:
|
Customer Performance Survey:
Customers surveying this product said...
100%"Improves performance"
Currently all feedbacks are left by AsiaTees customers.
The Miscellaneous All ZTW 1:10 Scale Sensorless ESC Beast SL 45A has an average rating of stars based on 3 customer reviews.
ZTW Model was established in 2007, committing themselves to electronic power system for RC models. As an integrated enterprise with the ability to research & develop, produce and sell, their products have been selling well all over the 60 countries and districts in the world, which makes ZTW the most competitive brand and OEM enterprise through global RC lines. Its brushless ESC for car, boat, and helicopter & airplane are comparable to world famous brands especially in terms of performance in compatibility, reliability and stability.
To select ZTW is to select quality & trust. All products available at the largest online RC store.
Recent Customer Reviews - 3 Reviews Total
The Miscellaneous All ZTW 1:10 Scale Sensorless ESC Beast SL 45A has an average rating of stars based on 3 customer reviews.
-
275 people found this review helpful May 10, 2015overallFIT & FINISHDESIGNWas this review helpful? Yes
-
597 people found this review helpful April 29, 2015
The beast is a good esc.
overallFIT & FINISHDESIGNWas this review helpful? Yes -
229 people found this review helpful March 29, 2015overallFIT & FINISHDESIGNWas this review helpful? Yes
About ZTW
ZTW Model was established in 2007, committing themselves to electronic power system for RC models. As an integrated enterprise with the ability to research & develop, produce and sell, their products have been selling well all over the 60 countries and districts in the world, which makes ZTW the most competitive brand and OEM enterprise through global RC lines. Its brushless ESC for car, boat, and helicopter & airplane are comparable to world famous brands especially in terms of performance in compatibility, reliability and stability.
To select ZTW is to select quality & trust. All products available at the largest online RC store.