Miscellaneous   All Parts & Upgrades

 Miscellaneous ZTW 1:10 Scale Sensorless ESC Beast SL 45A

Miscellaneous All

Choose ZTW, Choose Quality & Trust!
PART: #ZTW/4104520
OUR INVENTORY:
Out Of Stock
USD $46
SALE!
USD $22.85
Best Price Guarantee
 

CUSTOMER REVIEWS

This product currently has 3 reviews

Overall Rating:
100%
0%
0%
0%
0%

Customer Performance Survey:

Customers surveying this product said...

100%"Improves performance"

Currently all feedbacks are left by AsiaTees customers.

TAGGED CATEGORIES:
PRODUCT INFORMATION:
  • ZTW BEAST ESC truck and car. High current applications finely tuned and tested by the experience Technician. proven to be top class, reliable and quality made . Featuring Enhanced throttle response, brake and throttle linearity. Advance software interface to set up or updating the software to make adjustment on your PC for update. make detail adjustments .you can make adjustments too using programming card. Featuring Low voltage cut off, overheating protection, throttle signal loss protection. MOSFET design provide high current output {1080 amp peaks} with low resistance {.0003 Ohm} Micro-fin aluminum heat sink and water proof. ZTW are compatible with NOVAK, LRP,ORION Sensored brushless motor.
    TECHNICAL SPECIFICATION:
  • Model type: Beast SL45A
  • Length:44mm
  • Width:32mm
  • Height:37mm
  • Weight:95g
  • Max continuous Current:45A
  • Burst current:260A
  • BEC output:6V/2A
  • Motor type:4 pole Sensorless brushless motor
  • Battery:5-10 cell Nixx { NiMH/NiCd}2-3S Lipo
  • Suitable Vehicles:1:10 on road or off cars and trucks, SCT.
  • Operate Environment:waterproof design

  • POWERING UP THE ESC FOR THE FIRST TIME AND SETTING THE AUTOMATIC THROTTLE CALIBRATION
  • The ZTW ESC features Automatic Throttle Calibration to attain the smoothest throttle response and resolution throughout the entire throttle range of your transmitter. This step is done once to allow the ESC to “learn and memorize” your Transmitter’s throttle output signals and only repeated if you change your transmitter.
  • 1. Switch your Transmitter ON and set the throttle stick to its maximum position.
  • 2. Connect the battery pack , receiver and motor to the ESC. Wait for about 2 seconds, the motor will beep for twice, then put the throttle in the minimum position, the motor will also beep, which indicates that your ESC has got the signal range of the throttle from your transmitter. The throttle calibration is set and your ESC is ready to use.
  • ENTERING THE PROGRAMMING MODE
  • 1.Switch your Transmitter ON and set the throttle to its maximum position.
  • 2.Connect the battery pack to the ESC.
  • 3. Wait until you hear two short beeps (?? ?? ?? ??) confirming that the ESC has now entered the programming mode.2
  • 4. If the throttle stick is left in the maximum position beyond 5 seconds, the ESC will begin the sequence from one function and its associated setting options to another. (Please refer to the table below to cross reference the functions with the audible tones).
  • 5. When the desired tone for the function and setting option is reached, move the throttle stick down to its minimum position. ESC will emit two beeps (**) confirming the new setting has been stored.
  • 6. The ESC only allows the setting of one function at a time. Therefore should you require making changes to other function, disconnect the battery pack and wait 5 seconds to reconnect the battery and repeat the above step


  • Package total weight: 144.00 grams (incl. packaging)
  • Factory description: ZTW ZTW 1:10 Scale Sensorless ESC Beast SL 45A
  • Manufactured by ZTW
  • Manufacturer number: ZTW/4104520
  • This item is not eligible for in-store promotions
  • Nobody beats our price! See our Best Price Guarantee, or your money back!
  • Questions about this product? Ask Our Technical Support
  • You may Request Additional Product Information for this product.
  • Looking for screws / bolts to assemble this product? Email Us
  • View ATees.com Glossary of Terms

    Find something wrong in this description?
    Help us fix it!
    Report An Error

    ZTW 1:10 Scale Sensorless ESC Beast SL 45A by ZTW


    LOADING IMAGES

    Part: #ZTW/4104520 (3 customer reviews)
    **Discount shipping Applies
    USD $46
    SALE!
    USD $22.85
    Out Of Stock

    Tagged Categories
    • ZTW BEAST ESC truck and car. High current applications finely tuned and tested by the experience Technician. proven to be top class, reliable and quality made . Featuring Enhanced throttle response, brake and throttle linearity. Advance software interface to set up or updating the software to make adjustment on your PC for update. make detail adjustments .you can make adjustments too using programming card. Featuring Low voltage cut off, overheating protection, throttle signal loss protection. MOSFET design provide high current output {1080 amp peaks} with low resistance {.0003 Ohm} Micro-fin aluminum heat sink and water proof. ZTW are compatible with NOVAK, LRP,ORION Sensored brushless motor.
      TECHNICAL SPECIFICATION:
    • Model type: Beast SL45A
    • Length:44mm
    • Width:32mm
    • Height:37mm
    • Weight:95g
    • Max continuous Current:45A
    • Burst current:260A
    • BEC output:6V/2A
    • Motor type:4 pole Sensorless brushless motor
    • Battery:5-10 cell Nixx { NiMH/NiCd}2-3S Lipo
    • Suitable Vehicles:1:10 on road or off cars and trucks, SCT.
    • Operate Environment:waterproof design

    • POWERING UP THE ESC FOR THE FIRST TIME AND SETTING THE AUTOMATIC THROTTLE CALIBRATION
    • The ZTW ESC features Automatic Throttle Calibration to attain the smoothest throttle response and resolution throughout the entire throttle range of your transmitter. This step is done once to allow the ESC to “learn and memorize” your Transmitter’s throttle output signals and only repeated if you change your transmitter.
    • 1. Switch your Transmitter ON and set the throttle stick to its maximum position.
    • 2. Connect the battery pack , receiver and motor to the ESC. Wait for about 2 seconds, the motor will beep for twice, then put the throttle in the minimum position, the motor will also beep, which indicates that your ESC has got the signal range of the throttle from your transmitter. The throttle calibration is set and your ESC is ready to use.
    • ENTERING THE PROGRAMMING MODE
    • 1.Switch your Transmitter ON and set the throttle to its maximum position.
    • 2.Connect the battery pack to the ESC.
    • 3. Wait until you hear two short beeps (?? ?? ?? ??) confirming that the ESC has now entered the programming mode.2
    • 4. If the throttle stick is left in the maximum position beyond 5 seconds, the ESC will begin the sequence from one function and its associated setting options to another. (Please refer to the table below to cross reference the functions with the audible tones).
    • 5. When the desired tone for the function and setting option is reached, move the throttle stick down to its minimum position. ESC will emit two beeps (**) confirming the new setting has been stored.
    • 6. The ESC only allows the setting of one function at a time. Therefore should you require making changes to other function, disconnect the battery pack and wait 5 seconds to reconnect the battery and repeat the above step


  • Product weight: 144.00 grams
  • Factory description: ZTW ZTW 1:10 Scale Sensorless ESC Beast SL 45A
  • Manufactured by ZTW
  • Manufacturer number: ZTW/4104520
  • This item is not eligible for in-store promotions
  • Nobody beats our price! See our Best Price Guarantee, or your money back!
  • Questions about this product? Ask Our Technical Support
  • You may Request Additional Product Information for this product.
  • Looking for screws / bolts to assemble this product? Email Us
  • View ATees.com Glossary of Terms
    Find something wrong in this description?
    Help us fix it!
    Report An Error

    This product currently has 3 reviews

    Overall Rating:
    100%
    0%
    0%
    0%
    0%

    Customer Performance Survey:

    Customers surveying this product said...

    100%"Improves performance"

    Currently all feedbacks are left by AsiaTees customers.

    The Miscellaneous All ZTW 1:10 Scale Sensorless ESC Beast SL 45A has an average rating of stars based on 3 customer reviews.

    • 272 people found this review helpful May 10, 2015
      Sten from Åkersberga,
      overall
      FIT & FINISH
      DESIGN
      Was this review helpful? Yes
    • 594 people found this review helpful April 29, 2015
      dave b from auckland NZ

      The beast is a good esc.

      overall
      FIT & FINISH
      DESIGN
      Was this review helpful? Yes
    • 222 people found this review helpful March 29, 2015
      Rodney from USA
      overall
      FIT & FINISH
      DESIGN
      Was this review helpful? Yes
    Choose ZTW, Choose Quality & Trust!
    Choose ZTW, Choose Quality & Trust!
    ZTW Model was established in 2007, committing themselves to electronic power system for RC models. As an integrated enterprise with the ability to research & develop, produce and sell, their products have been selling well all over the 60 countries and districts in the world, which makes ZTW the most competitive brand and OEM enterprise through global RC lines. Its brushless ESC for car, boat, and helicopter & airplane are comparable to world famous brands especially in terms of performance in compatibility, reliability and stability.

    To select ZTW is to select quality & trust. All products available at the largest online RC store.

    Recent Customer Reviews - 3 Reviews Total  

    The Miscellaneous All ZTW 1:10 Scale Sensorless ESC Beast SL 45A has an average rating of stars based on 3 customer reviews.

    • 272 people found this review helpful May 10, 2015
      Sten from Åkersberga,
      overall
      FIT & FINISH
      DESIGN
      Was this review helpful? Yes
      Miscellaneous All ZTW 1:10 Scale Sensorless ESC Beast SL 45A by ZTW
    • 594 people found this review helpful April 29, 2015
      dave b from auckland NZ

      The beast is a good esc.

      overall
      FIT & FINISH
      DESIGN
      Was this review helpful? Yes
      Miscellaneous All ZTW 1:10 Scale Sensorless ESC Beast SL 45A by ZTW
    • 222 people found this review helpful March 29, 2015
      Rodney from USA
      overall
      FIT & FINISH
      DESIGN
      Was this review helpful? Yes
      Miscellaneous All ZTW 1:10 Scale Sensorless ESC Beast SL 45A by ZTW

    About ZTW

    Choose ZTW, Choose Quality & Trust!
    Choose ZTW, Choose Quality & Trust!
    ZTW Model was established in 2007, committing themselves to electronic power system for RC models. As an integrated enterprise with the ability to research & develop, produce and sell, their products have been selling well all over the 60 countries and districts in the world, which makes ZTW the most competitive brand and OEM enterprise through global RC lines. Its brushless ESC for car, boat, and helicopter & airplane are comparable to world famous brands especially in terms of performance in compatibility, reliability and stability.

    To select ZTW is to select quality & trust. All products available at the largest online RC store.

    Back To Top