Traxxas   TRX-4 Parts & Upgrades

 Traxxas N2R High Clearance Skid for TRX4 for Traxxas TRX-4

Traxxas TRX-4

PART: #BH/BTX-0050C
OUR INVENTORY:
Out Of Stock
USD $26.99
Best Price Guarantee

Temporarily Unavailable for Checkout

Notify me when this item is in stock

 

CUSTOMER REVIEWS

This product currently has 1 reviews

Overall Rating:
100%
0%
0%
0%
0%

Customer Performance Survey:

Customers surveying this product said...

100%"Improves performance"

Currently all feedbacks are left by AsiaTees customers.

PRODUCT INFORMATION:
  • Watch a video introduction about this product
  • This N2R High Clearance Skid gaines 4mm of additional ground clearance compared to the stock skid in critical areas, and smoother surfaces with better angles for sliding over roots and rocks with ease.  This version is printed in-house using high-strength nylon.

    Package includes:
    • 1x skid
    • 1x M3x8 FHCS
    • 2x M3X16 BHCS
    • 1x M3x8 BHCS
    • 2x M3x30 BHCS

    Installation notes

    • Reuse stock hardware in stock locations EXCEPT as follows:
      • (a) use M3x8 FHCS under front of skid to attach transmission (replaces stock M3x10 BHCS)
      • (b) use M3x16 BHCS to attach front lower links (replaces stock M3x15 BHCS)
      • (c) use M3x8 BHCS to attach right rear of transmission (replaces stock M3x10 BHCS)
      • (d) use M3x30 BHCS to attach rear upper links (replaces stock M3x25 BHCS)
    • Completely remove side tray on right side before installing N2R skid
    • Install front upper link in N2R skid BEFORE securing the skid to the chassis with the remaining 6 screws.
    • Make sure the front upper link screw is properly aligned with the receiving hole in the skid opposite the chassis rail before tightening the front upper link screw all the way.
    • Tighten all screws by hand and be careful not to overtighten.  Use of power drivers may result in stripping out screw holes and/or cracking in the N2R skid.
  • Package total weight: 62.00 grams (incl. packaging)
  • Factory description: BowHouse RC Traxxas TRX-4 N2R High Clearance Skid
  • Manufactured by BowHouse RC
  • Manufacturer number: BH/BTX-0050C
  • This item is not eligible for in-store promotions
  • Nobody beats our price! See our Best Price Guarantee, or your money back!
  • Questions about this product? Ask Our Technical Support
  • You may Request Additional Product Information for this product.
  • Looking for screws / bolts to assemble this product? Email Us
View ATees.com Glossary of Terms

Find something wrong in this description?
Help us fix it!
Report An Error

Traxxas   TRX-4 Parts & Upgrades
N2R High Clearance Skid for TRX4 by BowHouse RC


LOADING IMAGES

Part: #BH/BTX-0050C (1 customer reviews)
*Ships Free WORLDWIDE
USD $26.99
Out Of Stock

Notify me when this item is in stock

  • Watch a video introduction about this product
  • This N2R High Clearance Skid gaines 4mm of additional ground clearance compared to the stock skid in critical areas, and smoother surfaces with better angles for sliding over roots and rocks with ease.  This version is printed in-house using high-strength nylon.

    Package includes:
    • 1x skid
    • 1x M3x8 FHCS
    • 2x M3X16 BHCS
    • 1x M3x8 BHCS
    • 2x M3x30 BHCS

    Installation notes

    • Reuse stock hardware in stock locations EXCEPT as follows:
      • (a) use M3x8 FHCS under front of skid to attach transmission (replaces stock M3x10 BHCS)
      • (b) use M3x16 BHCS to attach front lower links (replaces stock M3x15 BHCS)
      • (c) use M3x8 BHCS to attach right rear of transmission (replaces stock M3x10 BHCS)
      • (d) use M3x30 BHCS to attach rear upper links (replaces stock M3x25 BHCS)
    • Completely remove side tray on right side before installing N2R skid
    • Install front upper link in N2R skid BEFORE securing the skid to the chassis with the remaining 6 screws.
    • Make sure the front upper link screw is properly aligned with the receiving hole in the skid opposite the chassis rail before tightening the front upper link screw all the way.
    • Tighten all screws by hand and be careful not to overtighten.  Use of power drivers may result in stripping out screw holes and/or cracking in the N2R skid.
  • Product weight: 62.00 grams
  • Factory description: BowHouse RC Traxxas TRX-4 N2R High Clearance Skid
  • Manufactured by BowHouse RC
  • Manufacturer number: BH/BTX-0050C
  • This item is not eligible for in-store promotions
  • Nobody beats our price! See our Best Price Guarantee, or your money back!
  • Questions about this product? Ask Our Technical Support
  • You may Request Additional Product Information for this product.
  • Looking for screws / bolts to assemble this product? Email Us
View ATees.com Glossary of Terms
Find something wrong in this description?
Help us fix it!
Report An Error

This product currently has 1 reviews

Overall Rating:
100%
0%
0%
0%
0%

Customer Performance Survey:

Customers surveying this product said...

100%"Improves performance"

Currently all feedbacks are left by AsiaTees customers.

The Traxxas TRX-4 N2R High Clearance Skid for TRX4 has an average rating of stars based on 1 customer reviews.

  • 190 people found this review helpful June 26, 2019
    Rob from Camas, Wa
    overall
    FIT & FINISH
    DESIGN
    Was this review helpful? Yes

It all started with a trail run. After watching David's TF2 hang up on every rock and root and blade of grass for 2 hours, Nick said, "Hey, I can fix that for you." A couple of weeks later, Nick gave David a prototype that he said he'd need back (David still hasn't given it back), and the N2R skid was born. Originally sold as a Helios RC product, the feedback was so good that we decided to form BowHouse RC to create more cool stuff for your RC trucks. We've now expanded our offerings to include parts for the Axial SCX10 / SCX10 II, Traxxas TRX-4, HPI Venture, GCM CMAX, as well as a full line of axles for your scale builds. All of our parts are developed in-house using sophisticated 3D scanning technology and CAD modelling. We choose materials that are both strong enough and flexible enough to withstand plenty of abuse. Most parts are printed using either selective laser sintering (SLS nylon) or carbon fiber-reinforced nylon filament. We have plenty of new products in the works, and we're always open to hearing about products you'd like to see. So if you're looking for something we don't have, feel free to send us an email. Thanks for visiting our site!

Recent Customer Reviews - 1 Reviews Total  

The Traxxas TRX-4 N2R High Clearance Skid for TRX4 has an average rating of stars based on 1 customer reviews.

  • 190 people found this review helpful June 26, 2019
    Rob from Camas, Wa
    overall
    FIT & FINISH
    DESIGN
    Was this review helpful? Yes
    Traxxas TRX-4 N2R High Clearance Skid for TRX4 by BowHouse RC

About BowHouse RC


It all started with a trail run. After watching David's TF2 hang up on every rock and root and blade of grass for 2 hours, Nick said, "Hey, I can fix that for you." A couple of weeks later, Nick gave David a prototype that he said he'd need back (David still hasn't given it back), and the N2R skid was born. Originally sold as a Helios RC product, the feedback was so good that we decided to form BowHouse RC to create more cool stuff for your RC trucks. We've now expanded our offerings to include parts for the Axial SCX10 / SCX10 II, Traxxas TRX-4, HPI Venture, GCM CMAX, as well as a full line of axles for your scale builds. All of our parts are developed in-house using sophisticated 3D scanning technology and CAD modelling. We choose materials that are both strong enough and flexible enough to withstand plenty of abuse. Most parts are printed using either selective laser sintering (SLS nylon) or carbon fiber-reinforced nylon filament. We have plenty of new products in the works, and we're always open to hearing about products you'd like to see. So if you're looking for something we don't have, feel free to send us an email. Thanks for visiting our site!

Back To Top