The Landfreeder Quadtrack is a fresh new twist on the fun world of Tamiya R/C. This kit uses a new variant of the TT-02 chassis with three-sided track units in place of the wheels: the result is awesome traction that can be used to take on rough terrain. Furthermore, the polycarbonate truck body comes already pre-painted in Tamiya PS-5 black. 

This is an electric radio control car assembly kit for a pickup truck that has a delta (triangular) shaped truck (crawler) unit mounted on the axle instead of front and rear tires. The chassis is based on the shaft drive 4WD TT-02. The truck unit of interest uses a resin truck (crawler) that can be assembled using metal pins, and consists of a sprocket wheel that is connected to the drive shaft to transmit power and eight rollers.

It has a wider ground contact area than tires, has excellent climbing performance, and is hard to stack even on rough roads such as snowy fields, sandy beaches, and muddy roads, and exhibits stable grip. In addition, it is equipped with a dustproof polycarbonate chassis cover and front inner fender to improve driving reliability. The body is made of polycarbonate, which is the image of a pickup truck from the 1980s. The body is black, the window is smoked, and the wheel arch is cut. In addition, the grill guard equipped with fog lamps and the roll bar are plated parts, and the scale feeling is sufficient. 

The chassis is based on the shaft drive 4WD TT-02, and adopts the TT-02FT with the front and rear tires changed to truck units. The truck unit is attached to the upper and lower suspension arms, and the power of the drive shaft is transmitted to the truck by the sprocket wheel. Eight rollers are placed on the ground plane. In addition, it has a swing mechanism, and the third roller can move up and down independently.

The grounding property is further improved. Of course, the extra road clearance by installing the truck unit is also a big attraction on rough roads. The truck is made of resin and adopts a connection assembly type using metal pins. Compared to rubber, it has less drive loss and can run smoothly even at low speeds. Moreover, there are two types of tops (footboards), a flat standard type and a glosser type with protrusions. You can select according to the road surface. The motor is equipped with a torque CR tune as standard equipment to improve running performance on rough roads.

Features:

• 1/10 scale R/C model assembly kit. Length: 425, width: 247mm.
• The Landfreeder body comes molded in polycarbonate, pre-painted Black (PS-5) and with Smoke (PS-31) painted windows. Separate plated parts recreate grille cover, fog lamps and roll bar.
• The TT-02FT is a variant of the TT-02 chassis, with four tracks on its suspension.
• Each of the three-sided track units is 39.3mm in width and has a contact area of 60mm length. Tracks require assembly from link parts, and offer efficient traction.
• Two types of elastomer track link (standard and grouser) are included for setup options.
• Track units are attached to suspension arms via plates, and each features a sprocket and four rollers. The third roller is sprung to further enhance performance.
• Polycarbonate chassis cover and wheel well liners give protection from dust and dirt encountered during off-road driving.
• TT-02 four-bevel differentials and identical suspension arms are used
• • Requires: 2-channel radio, steering servo, 7.2-7.4volt battery pack and compatible charger.

• Length: 425 mm
• Width: 247 mm
• Height: 199 mm
• Wheelbase: 251 mm
• Track ground contact length: 60 mm x 4
• Track width: 39 mm
• Frame: bathtub type
• Drive system: vertical motor / shaft drive 4WD
• Differential gear = resin for both front and rear Ltd. 4-bevel
• Steering: 3-piece tie rod
• Suspension: 4-wheel double wishbone
• Dampers: Front and Rear friction
• Gear ratio: 11.38: 1
• Motor: CR tune 540-brushed type
• Adjustable Gear Ratio: Yes
• Bearings: Plastic bushing
• Body Material: Polycarbonate pre-painted body
• Body Stickers: Included
• Chassis Material: ABS Plastic
• Chassis Type: TT02FT
• Construction Type: Assembly Kit
• Differential Type: Gear
• Drive Type: 4WD
• Electronic Speed Control (ESC): New TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over.
• Scale: 1/10
• Terrain Use: Multi-Purpose

• Rc Landfreeder Quadtrack TT02FT
• 540-brushed type motor.
• New TBLE-04S ESC. Compatible with brushless motors (sensored) of 21.5 turns and higher, and Tamiya brushed motors 25 turns and over.