Specific gyroscope for model cars of all categories.
Designed by Futaba to help pilots in driving their racing and non-competitive model cars.
In fact, this device installed on the model car prevents the model from spinning and avoids skidding.
The device's effectiveness is adjustable, therefore using the hand lever (Or via radio compatible!) it is possible to adjust its intervention in order to make it more or less aggressive.
FEATURES:
It is a specific gyroscope to stabilize cars both in straight lines and in curves without taking into account the characteristics of the road, etc.
Sensitivity is adjustable remotely from the transmitter with at least 3 channels or directly from the trim on the gyro. You can also choose the operating mode between AVCS and NORMAL.
Compact and lightweight: 20.5x20.5x11 mm - 3.5 g
Can be used immediately with a minimum of settings.
S.Bus/S.Bus2 connection is supported.
MEMS sensor.
Factory description: Futaba Futaba GYC430 Gyro For Car
Specific gyroscope for model cars of all categories.
Designed by Futaba to help pilots in driving their racing and non-competitive model cars.
In fact, this device installed on the model car prevents the model from spinning and avoids skidding.
The device's effectiveness is adjustable, therefore using the hand lever (Or via radio compatible!) it is possible to adjust its intervention in order to make it more or less aggressive.
FEATURES:
It is a specific gyroscope to stabilize cars both in straight lines and in curves without taking into account the characteristics of the road, etc.
Sensitivity is adjustable remotely from the transmitter with at least 3 channels or directly from the trim on the gyro. You can also choose the operating mode between AVCS and NORMAL.
Compact and lightweight: 20.5x20.5x11 mm - 3.5 g
Can be used immediately with a minimum of settings.
S.Bus/S.Bus2 connection is supported.
MEMS sensor.
Factory description: Futaba Futaba GYC430 Gyro For Car
Honshitsu-no-Chokushi FUTABA CORPORATION was established in 1948 as a manufacturer and seller of receiver vacuum tubes.
Utilizing vacuum tube technology, Futaba began manufacturing vacuum fluorescent displays. In 1962, Futaba began producing radio control equipment as well as press die set components, establishing what still remains as two of the company's primary divisions.
This was followed by the development of mold base components and the more recent addition of VFD modules to complete the lineup of Futaba's major products.
Firmly embracing the principle of manufacturing each component in-house, Futaba creates everything from its own tools to its own manufacturing facilities.
Honshitsu-no-Chokushi FUTABA CORPORATION was established in 1948 as a manufacturer and seller of receiver vacuum tubes.
Utilizing vacuum tube technology, Futaba began manufacturing vacuum fluorescent displays. In 1962, Futaba began producing radio control equipment as well as press die set components, establishing what still remains as two of the company's primary divisions.
This was followed by the development of mold base components and the more recent addition of VFD modules to complete the lineup of Futaba's major products.
Firmly embracing the principle of manufacturing each component in-house, Futaba creates everything from its own tools to its own manufacturing facilities.
ATees.com uses cookies and similar technologies. By using ATees.com, you are agreeing to our revised Privacy Policy and Terms and Conditions, including our Cookie Policy.