Redcat
|
||||
LOADING IMAGES
|
PART: #BH/BRC-0010
|
|
|
|||||||||||||
CUSTOMER REVIEWS
This product currently has 2 reviews
Overall Rating:
|
 |
Customer Performance Survey:
Customers surveying this product said...
100%"Improves performance"
Currently all feedbacks are left by AsiaTees customers.
PRODUCT INFORMATION:
Find something wrong in this description?
Help us fix it! Report An Error
- There are lots of things to like about the Redcat Gen8. But the bulbous mass under the skid isn't one of them. No worries...our N2R High Clearance Skid for the Gen8 eliminates that unsightly protrusion and adds over 5mm of ground clearance, allowing your Gen8 to glide over roots and rocks with ease. Skids are printed in-house using high-strength nylon.
Package includes 1 skid and 4x M3 locknuts
Installation tips
- If you are not planning to replace the stock driveshafts, we do NOT recommend trying to remove them when installing the skid. Stock driveshafts are secured with red thread-lock that is extremely difficult to remove, and it is NOT necessary to remove the driveshafts to replace the skid.
- Start by removing the stock battery tray and transfer case from the stock skid. Then disconnect all 7 links from the stock skid, followed by the remaining 8 screws that secure the skid to the chassis.
- Chassis rails will flex enough to allow you to remove the stock skid and install the N2R skid without having to detach bumper mounts or cross-members.
- IMPORTANT - When installing rear upper links, insert one M3 washer between each rear upper link rod end and the skid (see picture).
- After installing the N2R skid, you will need to use the included 4x M3 locknuts to secure the screws that pass through the front and back of the stock sliders into the forward-most and rear-most holes in the stock skid.
- Package total weight: 80.00 grams (incl. packaging)
- Factory description: BowHouse RC Redcat Gen8 Scout II N2R High Clearance Skid for Redcat Gen8
- Manufactured by BowHouse RC
- Manufacturer number: BH/BRC-0010
- This item is not eligible for in-store promotions
- Nobody beats our price! See our Best Price Guarantee, or your money back!
- Questions about this product? Ask Our Technical Support
- You may Request Additional Product Information for this product.
- Looking for screws / bolts to assemble this product? Email Us
Find something wrong in this description?
Help us fix it! Report An Error
Redcat
Gen8 Scout II Parts & Upgrades
N2R High Clearance Skid for Redcat Gen8
by BowHouse RC
LOADING IMAGES
Out Of Stock
Notify me when this item is in stock
- There are lots of things to like about the Redcat Gen8. But the bulbous mass under the skid isn't one of them. No worries...our N2R High Clearance Skid for the Gen8 eliminates that unsightly protrusion and adds over 5mm of ground clearance, allowing your Gen8 to glide over roots and rocks with ease. Skids are printed in-house using high-strength nylon.
Package includes 1 skid and 4x M3 locknuts
Installation tips
- If you are not planning to replace the stock driveshafts, we do NOT recommend trying to remove them when installing the skid. Stock driveshafts are secured with red thread-lock that is extremely difficult to remove, and it is NOT necessary to remove the driveshafts to replace the skid.
- Start by removing the stock battery tray and transfer case from the stock skid. Then disconnect all 7 links from the stock skid, followed by the remaining 8 screws that secure the skid to the chassis.
- Chassis rails will flex enough to allow you to remove the stock skid and install the N2R skid without having to detach bumper mounts or cross-members.
- IMPORTANT - When installing rear upper links, insert one M3 washer between each rear upper link rod end and the skid (see picture).
- After installing the N2R skid, you will need to use the included 4x M3 locknuts to secure the screws that pass through the front and back of the stock sliders into the forward-most and rear-most holes in the stock skid.
- Product weight: 80.00 grams
- Factory description: BowHouse RC Redcat Gen8 Scout II N2R High Clearance Skid for Redcat Gen8
- Manufactured by BowHouse RC
- Manufacturer number: BH/BRC-0010
- This item is not eligible for in-store promotions
- Nobody beats our price! See our Best Price Guarantee, or your money back!
- Questions about this product? Ask Our Technical Support
- You may Request Additional Product Information for this product.
- Looking for screws / bolts to assemble this product? Email Us
Find something wrong in this description?
Help us fix it! Report An Error
This product currently has 2 reviews
Overall Rating:
|
|
Customer Performance Survey:
Customers surveying this product said...
100%"Improves performance"
Currently all feedbacks are left by AsiaTees customers.
The Redcat Gen8 Scout II N2R High Clearance Skid for Redcat Gen8 has an average rating of
stars based on 2 customer reviews.
It all started with a trail run. After watching David's TF2 hang up on every rock and root and blade of grass for 2 hours, Nick said, "Hey, I can fix that for you." A couple of weeks later, Nick gave David a prototype that he said he'd need back (David still hasn't given it back), and the N2R skid was born. Originally sold as a Helios RC product, the feedback was so good that we decided to form BowHouse RC to create more cool stuff for your RC trucks. We've now expanded our offerings to include parts for the Axial SCX10 / SCX10 II, Traxxas TRX-4, HPI Venture, GCM CMAX, as well as a full line of axles for your scale builds. All of our parts are developed in-house using sophisticated 3D scanning technology and CAD modelling. We choose materials that are both strong enough and flexible enough to withstand plenty of abuse. Most parts are printed using either selective laser sintering (SLS nylon) or carbon fiber-reinforced nylon filament. We have plenty of new products in the works, and we're always open to hearing about products you'd like to see. So if you're looking for something we don't have, feel free to send us an email. Thanks for visiting our site!
Recent Customer Reviews - 2 Reviews Total 
The Redcat Gen8 Scout II N2R High Clearance Skid for Redcat Gen8 has an average rating of
stars based on 2 customer reviews.
About BowHouse RC
It all started with a trail run. After watching David's TF2 hang up on every rock and root and blade of grass for 2 hours, Nick said, "Hey, I can fix that for you." A couple of weeks later, Nick gave David a prototype that he said he'd need back (David still hasn't given it back), and the N2R skid was born. Originally sold as a Helios RC product, the feedback was so good that we decided to form BowHouse RC to create more cool stuff for your RC trucks. We've now expanded our offerings to include parts for the Axial SCX10 / SCX10 II, Traxxas TRX-4, HPI Venture, GCM CMAX, as well as a full line of axles for your scale builds. All of our parts are developed in-house using sophisticated 3D scanning technology and CAD modelling. We choose materials that are both strong enough and flexible enough to withstand plenty of abuse. Most parts are printed using either selective laser sintering (SLS nylon) or carbon fiber-reinforced nylon filament. We have plenty of new products in the works, and we're always open to hearing about products you'd like to see. So if you're looking for something we don't have, feel free to send us an email. Thanks for visiting our site!
For the month of December, choose FedEx or DHL delivery and take 20% off shipping.