Currently all feedbacks are left by AsiaTees customers.
PRODUCT INFORMATION:
Combo V3H-B
Advantages of XERUN-120A-V3.1 speedo
Aluminum bottom case improves the heat dissipation (The previous V3 speedo uses plastic bottom case);
Improved heat-sink with 1mm gap between the cooling fan allows more air flow to reduce the temperature of speedo;
Improved dust-proof design. Rubber rings are applied at the sensor port and the program port;
Aluminum screws of cooling fan look better and more professional;
Improved electronic switch has stronger current endurance to be more reliable;
New firmware allows driver to adjust the throttle neutral range, and solves the "turbo lost in high temperature" problem in the previous version firmware.
Specification (XERUN-120A-V3.1)
Current: Continuous: 120A, Burst: 760A
Input: * Note #1 4-9 cells NiMH/NiCd or 2-3S LiPo
Built-in BEC 6V@3A (linear mode)
Resistance 0.0003 Ohm
Motor Supported Sensored and sensorless brushless motor
Suitable Motor
With 2 Lipo or 4-6 NiMH 1/10 on-road: >=3.5T, 1/10 off-road: >=5.5T
With 3 Lipo or 7-9 NiMH 1/10 on-road: >=5.5T, 1/10 off-road: >=8.5T
37.5mm(L) * 37mm(W) * 29.5mm(H), includes wire connectors
Weight: 93g
XERUN BANDIT V10 Competition Motor Feature
Extreme powerful (the output power of BANDIT V10 motor is 20% higher than the standard V10 motors), specially designed for out-law STOCK races.
Designed to withstand extreme levels of use at its highest peak performance.
Complete new CNC cut motor case with extra front spoke ventilation slots.
Works as a sensored unit and also sensorless without the sensor cable attached.
Multiple steps of mechanical timing adjustable from 20 degree to 50 degree.
Minimal maintenance is required with precise machining technology which ensures a minimum tolerance end play of the rotor shaft. Eliminating the copper shims used in most of today's motors. 200°C high temperature tolerance and high purity copper windings maximize conductivity and reliability.
200°C high temperature tolerance sintered NdFeb magnets.
Extreme low resistance multi-layered outlet PCB and high RPM NSK bearings.
Note: BANDIT motor isn't compliant with ROAR, IFMAR, BRCA and JMRCA rules, certi_cated by RoHS, CE, FCC etc.
Package total weight: 601.00 grams (incl. packaging)
Package size: 17.00 x 21.00 x 8.00cm
Factory description: Hobbywing XERUN Brushless System COMBO-V3H-B: XERUN-120A-V3.1+XERUN-BANDIT-V10-13.5T for 1:10 Stock Competition
Aluminum bottom case improves the heat dissipation (The previous V3 speedo uses plastic bottom case);
Improved heat-sink with 1mm gap between the cooling fan allows more air flow to reduce the temperature of speedo;
Improved dust-proof design. Rubber rings are applied at the sensor port and the program port;
Aluminum screws of cooling fan look better and more professional;
Improved electronic switch has stronger current endurance to be more reliable;
New firmware allows driver to adjust the throttle neutral range, and solves the "turbo lost in high temperature" problem in the previous version firmware.
Specification (XERUN-120A-V3.1)
Current: Continuous: 120A, Burst: 760A
Input: * Note #1 4-9 cells NiMH/NiCd or 2-3S LiPo
Built-in BEC 6V@3A (linear mode)
Resistance 0.0003 Ohm
Motor Supported Sensored and sensorless brushless motor
Suitable Motor
With 2 Lipo or 4-6 NiMH 1/10 on-road: >=3.5T, 1/10 off-road: >=5.5T
With 3 Lipo or 7-9 NiMH 1/10 on-road: >=5.5T, 1/10 off-road: >=8.5T
37.5mm(L) * 37mm(W) * 29.5mm(H), includes wire connectors
Weight: 93g
XERUN BANDIT V10 Competition Motor Feature
Extreme powerful (the output power of BANDIT V10 motor is 20% higher than the standard V10 motors), specially designed for out-law STOCK races.
Designed to withstand extreme levels of use at its highest peak performance.
Complete new CNC cut motor case with extra front spoke ventilation slots.
Works as a sensored unit and also sensorless without the sensor cable attached.
Multiple steps of mechanical timing adjustable from 20 degree to 50 degree.
Minimal maintenance is required with precise machining technology which ensures a minimum tolerance end play of the rotor shaft. Eliminating the copper shims used in most of today's motors. 200°C high temperature tolerance and high purity copper windings maximize conductivity and reliability.
200°C high temperature tolerance sintered NdFeb magnets.
Extreme low resistance multi-layered outlet PCB and high RPM NSK bearings.
Note: BANDIT motor isn't compliant with ROAR, IFMAR, BRCA and JMRCA rules, certi_cated by RoHS, CE, FCC etc.
Product weight: 601.00 grams
Package size: 17.00 x 21.00 x 8.00cm
Factory description: Hobbywing XERUN Brushless System COMBO-V3H-B: XERUN-120A-V3.1+XERUN-BANDIT-V10-13.5T for 1:10 Stock Competition
Innovation Powered By Passion Hobbywing, as a global leader in the field of brushless motors and control systems for RC models, provides their customers with the perfect experience that beyond their expectation and help them to realize their dreams.
Major products at Hobbywing includes brushless motor and controllers for RC models, while subsidiary products include other electronic equipments that may be adopted on RC models.
Innovation Powered By Passion Hobbywing, as a global leader in the field of brushless motors and control systems for RC models, provides their customers with the perfect experience that beyond their expectation and help them to realize their dreams.
Major products at Hobbywing includes brushless motor and controllers for RC models, while subsidiary products include other electronic equipments that may be adopted on RC models.
ATees.com uses cookies and similar technologies. By using ATees.com, you are agreeing to our revised Privacy Policy and Terms and Conditions, including our Cookie Policy.