The RSX speed control defines capability and versatility unlike any other electronic speed control on the market. With high-end components utilized throughout, the RSX takes 1:10th scale competition racing to a new level. Power, control and reliability remain the foundation of this RS-based ESC. Built with a custom high-efficiency aluminum heatsink housing and full onboard programming, the RSX provides the tools for the win!
Armed with features, the RSX was designed for modified racing. The aluminum housing and detachable fan shroud system maximize cooling for extreme racing conditions. Capabilities such as datalogging and HotWire EZ Port communication allow you to unlock the full potential of the RSX with extensive tuning and datalog feedback. The high-voltage BEC puts out the power you need for fast, precise steering servo operation. If you're looking for the ultimate ESC in modified racing, the RSX is there for the job.
ESC
Controls: Forward/Brake/Reverse
Input Voltage: 2S-3S LiPo / 4-9S NiMH **3S LiPo on 3500kV and down or 10.5T and up ONLY**
BEC: 6.0v / 7.4v @ 5.5amps
Motor Limit Brushless Mode 2S: 2.5 Turn 2-pole 36mm Can
Motor Limit Brushless Mode 3S: 8.5 Turn 2-pole 36mm Can / 3500kV max
Motor Limit Brushed 2S: 6 Turn, 36mm Can
Motor Limit Brushed 3S: 12 Turn, 36mm Can
Max Current: 180amps per phase
Max Chassis Weight: 4lbs / 1815g
Timing Profiles: 7 choices (on board)
Brushed Modes: FWD Only / FWD-REV / FWD-REV Delay
Brushless Modes: FWD Only / FWD-REV / FWD-REV Delay
Dimensions: 1.22 x 1.46 x .82in / 31.2 x 37.2 x 21mm
Weight: 1.5oz / 42g
Tekin’s third generation motors are re-engineered from the ground up resulting in a smaller, lighter and faster sensored motor. On Road or Off, the new GEN3 handles the task in stride, delivering the smooth power across all RPMs that you’ve come to expect from a Tekin motor. Much more than a re-hash and new look, the GEN3 Redline Sensored Motor is now ready for any situation and able to create the speed you need to win.
The GEN3 21.5T, 17.5T and 13.5T are available in an RPM version as well as the standard versions. Designed for applications where higher RPM is more beneficial than torque, these motors are perfect for 1/12 and touring car racing classes.
The GEN3 modified group of motors are custom tuned with rotor sizes to give you the performance needed for your application. The 21.5T down to 8.5T group come standard with 12.5mm performance rotors and the 7.5T to 2.5T group are equipped with a 13mm rotor for that extra torque needed in modified racing.
The RSX speed control defines capability and versatility unlike any other electronic speed control on the market. With high-end components utilized throughout, the RSX takes 1:10th scale competition racing to a new level. Power, control and reliability remain the foundation of this RS-based ESC. Built with a custom high-efficiency aluminum heatsink housing and full onboard programming, the RSX provides the tools for the win!
Armed with features, the RSX was designed for modified racing. The aluminum housing and detachable fan shroud system maximize cooling for extreme racing conditions. Capabilities such as datalogging and HotWire EZ Port communication allow you to unlock the full potential of the RSX with extensive tuning and datalog feedback. The high-voltage BEC puts out the power you need for fast, precise steering servo operation. If you're looking for the ultimate ESC in modified racing, the RSX is there for the job.
ESC
Controls: Forward/Brake/Reverse
Input Voltage: 2S-3S LiPo / 4-9S NiMH **3S LiPo on 3500kV and down or 10.5T and up ONLY**
BEC: 6.0v / 7.4v @ 5.5amps
Motor Limit Brushless Mode 2S: 2.5 Turn 2-pole 36mm Can
Motor Limit Brushless Mode 3S: 8.5 Turn 2-pole 36mm Can / 3500kV max
Motor Limit Brushed 2S: 6 Turn, 36mm Can
Motor Limit Brushed 3S: 12 Turn, 36mm Can
Max Current: 180amps per phase
Max Chassis Weight: 4lbs / 1815g
Timing Profiles: 7 choices (on board)
Brushed Modes: FWD Only / FWD-REV / FWD-REV Delay
Brushless Modes: FWD Only / FWD-REV / FWD-REV Delay
Dimensions: 1.22 x 1.46 x .82in / 31.2 x 37.2 x 21mm
Weight: 1.5oz / 42g
Tekin’s third generation motors are re-engineered from the ground up resulting in a smaller, lighter and faster sensored motor. On Road or Off, the new GEN3 handles the task in stride, delivering the smooth power across all RPMs that you’ve come to expect from a Tekin motor. Much more than a re-hash and new look, the GEN3 Redline Sensored Motor is now ready for any situation and able to create the speed you need to win.
The GEN3 21.5T, 17.5T and 13.5T are available in an RPM version as well as the standard versions. Designed for applications where higher RPM is more beneficial than torque, these motors are perfect for 1/12 and touring car racing classes.
The GEN3 modified group of motors are custom tuned with rotor sizes to give you the performance needed for your application. The 21.5T down to 8.5T group come standard with 12.5mm performance rotors and the 7.5T to 2.5T group are equipped with a 13mm rotor for that extra torque needed in modified racing.
Tekin - Smarter, Smaller, Faster! In 2003 the industry was on the edge of evolving to LiPo batteries and brushless motors. With Tekin’s experience and modern advances in technology came the perfect opportunity to pioneer new products and change the game again. RC racing quickly evolved to what we know today as consistent performance, back to back batteries and long run times. This evolution in technology also allowed more people to enjoy the hobby by reducing the cost and effort per minute of driving time.
Tekin products are available worldwide and have won numerous Readers Choice Awards in recent years. All of our products are unique to Tekin and you will not find them under any other brand. Proudly designing and manufacturing our products in the USA (using foreign and domestic components) allows us to always be listening and constantly improving.
We are typically well represented on the podium at any major event or local race, and our team drivers around the world help us test our products and support our customers. When you choose Tekin products you are joining a family of dedicated people and loyal users that are helpful and just fun to be around.
Tekin - Smarter, Smaller, Faster! In 2003 the industry was on the edge of evolving to LiPo batteries and brushless motors. With Tekin’s experience and modern advances in technology came the perfect opportunity to pioneer new products and change the game again. RC racing quickly evolved to what we know today as consistent performance, back to back batteries and long run times. This evolution in technology also allowed more people to enjoy the hobby by reducing the cost and effort per minute of driving time.
Tekin products are available worldwide and have won numerous Readers Choice Awards in recent years. All of our products are unique to Tekin and you will not find them under any other brand. Proudly designing and manufacturing our products in the USA (using foreign and domestic components) allows us to always be listening and constantly improving.
We are typically well represented on the podium at any major event or local race, and our team drivers around the world help us test our products and support our customers. When you choose Tekin products you are joining a family of dedicated people and loyal users that are helpful and just fun to be around.
ATees.com uses cookies and similar technologies. By using ATees.com, you are agreeing to our revised Privacy Policy and Terms and Conditions, including our Cookie Policy.