updated: 19-May-19

SkyRC Q200 is a Quad-channel charger with 4 independent circuits, which can charge four different kinds of batteries simultaneously. The charger adopts a 480×320 color LCD display, and paired channels (A&C or B&D) support power distribution in AC mode. Moreover, users could either connect it to PC or mobile device to further expand their using experience. Firmware upgrade is available via PC software interface.

Specification:

• Item No.: Q200
• Input Voltage : AC100-240V / DC 11 -18V   
• Charge Circuit Power    
• DC Input :CH A/CH B: 100W CH C/CH D: 50W
• AC Input : CH A+CH C=100W CH B+CH D=100W CH A/CH B: 50-100W CH C/CH D: 0-50W
• Discharge Circuit Power : 4 x 10W
• Charge Current Range : CH A/CH B 0.1-10A CH C/CH D 0.1-5A
• Discharge Current Range : 0.1-2Ax 4
• Current Drian for Balancing : Max 200mA/cell
• Trickle Charging Current : 50mA-300mA & OFF
• LiPo/LiFe/Lilon/LiHV Battery Cell Count : 1-6 Cells
• NiMH/NiCd Battery Cell Count : 1-15 Cells
• Pb Battery Voltage : 2-20V
• Dimension : 197x182x71mm
• Weight : 1325g

Features:

• Large screen LCD
• Terminal Voltage Control
• Re-peak Mode for NiMH/NiCd Battery
• Battery Meter
• Battery Internal Resistance Meter
• PC Communications: USB Port for PC Control & Firmware Upgrade
• Smart Phone Control & Monitor Via Wi-Fi Module( SK-600075 Optional Part)
• Four channels charge four different kinds of batteries simultaneously
• Support charging power distribution intellectively when operating with AC input

Note: The plug is USA specification

A very unique feature of Q200 is SCAN TO GO (automatically charging system). As the range of battery types and capacity becomes more and more, each battery requires its own dedicated charging process. It is easy to set up the charger incorrectly for a specific type of battery, resulting damage the battery or even cause an accident.

The revolutionary SCAN TO GO provides a solution to this problem by allowing the user to assign a QR Code which contains all the relevant data for the battery for charging or discharging. The user can create a unique QR Code by using "SkyCharger" apps. Print it and paste it on the battery.

Using your smartphone and launch "SkyCharger" app. Since all the essential information is stored in the QR Code. All you need to do is press the Scan button, and the charge or discharge process will start automatically.

Q200 supports power distribution in AC mode. For example, Channel B is 79W, then Channel D will be 21W, but total power will remain 100W