The Arocs series is a line of heavy-duty models introduced in 2013 by the world’s leading truck manufacturer, Daimler AG (Germany). This R/C model assembly kit recreates the Arocs 4151 8x4 dump truck (gross vehicle weight: 41t), which runs on a 12.8-liter turbocharged inline-6 engine capable of 510hp. It features a highly detailed body with distinctive bucket tooth front grille as a separate part. The roof has a front bar with light pods, and the inside of the cab is also depicted.

Behind the cab, a realistic one-piece resin bed is reinforced with a metal frame, while the ladder frame chassis features aluminum side channels with resin cross members. The two front axles are steered via a single servo, and power from the front-mounted TR Mighty Tuned Motor (35T) is delivered to rear axles via propeller shaft, with a built-in differential gear on each rear axle for smooth cornering. Its highly-realistic suspension utilizes metal leaf springs and friction dampers. Tandem die-cast front axles have individual leaf springs, and reinforced resin rear axles are a trunnion design. The assembly type 3-speed transmission allows gear changes via a separately available 4-channel transmitter.

Realistic Lights, Sounds, and Vibration
Tamiya Multi-Function Control Units (not included, sold separately) offer lights, sounds, and vibrations to accompany your R/C truck experience. Engine sounds have been digitally recorded from an actual truck, and together with air horn, gear shifting, and many other realistic sounds, give you the feeling that you are driving the real thing! Headlights, brake lights, fog lamp, hazard lights and turn signal operations are also at your fingertips.

Please note that longer cables (separately sold Items 56549, 56550 and 56551) are required to light up taillights.

Features:

• 1/14 scale R/C model assembly kit. Length: 667mm, Width: 196mm, height: 268mm.
• The Arocs 4151 form is recreated with an injection molded body, including depictions of cab rails, intake duct and other details. Separate parts recreate side mirrors and visor, etc.
• Both front axles are steered, via a single servo. Wheels turn realistically at slightly different angles.
• The Tamiya 4-axle chassis has a tough ladder frame with aluminum side channels and plastic cross members.
• Features a brand-new truck bed section comprised of metal subframe for superb durability.
• Install the separately sold Actuator Set (Item 56545) for realistic truck bed motion.
• TR mighty-tuned motor (35T) provides twin rear axles with ample power to carry loads in the truck bed.
• The new battery case is located over the second axle, which allows access even when there are loads in the bed.
• The roof features a depiction of light pods on the visor, which can be fitted with LEDs for a realistic finish.
• 3-speed transmission can be controlled via a separately sold 4ch R/C transmitter.
• Metal leaf spring dampers with built-in coil springs provide durable suspension.
• Use with separately-sold MFC-03 (Item 56523) (or MFC-01, Item 56511) for realistic lights and sounds.

• Length: 667mm
• Width: 196mm
• Height: 268mm
• Weight (without optional parts): Approx. 5.1kg
• Wheelbase: 133mm + 215mm + 103mm
• Tread: 156mm (front), 138mm (rear, double tire)
• Chassis: aluminum & polycarbonate resin ladder frame
• Front/rear leaf spring rigid suspension
• Caster angle (front/rear): 0°/0°
• Camber angle (front/rear): 0°
• Toe angle: 0°(front & rear)
• Aluminum dummy dampers (front & rear)
• Dual rear axle drive
• 3-gear transmission (gear shifting operated via transmitter)
• Gear ratio: (1st) 32.49:1, (2nd) 17.76:1, (3rd) 10.66:1
• 3-bevel differential gears
• TR Mighty Tuned Motor (35T)
• Tire width/diameter: 22mm/83mm (front) 22mm/84mm (rear)

• Tamiya Attack 4-channel radio
• R/C system w/ ESC (MFC-03 or TBLE-02S recommended)
• R6/AA/UM3 batteries for transmitter
• Battery pack & charger
• Steering servo
• ESC
• Tamiya TS spray paint.