The Zoomies Mock Exhaust Headers will work with virtually any body from 1:18 - 1:10 scale. Zoomies mimic straight pipes that drop directly from the exhaust ports of the heads on a car. You're most likely to see them popping out from under Nitro Funny Car bodies but many old-school classic muscle cars can run them as well.

The scale accessory is designed to mount directly to the body. They can be mounted straight up, angled backwards (or even forwards) and in some cases such as monster trucks, can even be mounted with the exhaust ends pointing down. Each set of RPM Zoomies Exhaust Headers comes with two mounting plates and a total of 8 exhaust tips (four per side).

What are “Zoomies”, you might be asking? It’s a term dating back to the 1970’s that describes 4 upturned exhaust pipes or headers on each side of the car. You may be most familiar with them from Nitro Funny Cars, Top Fuel and Monster Trucks although a few older folks might remember them sticking out from the rear of a van (you know who you are). Zoomies typically represent the biggest, baddest motors on the planet! If your ride is sporting Zoomies, there’s no question you’ve got horsepower! 

Tech Notes: RPM Zoomies Exhaust Headers are non-functional and cannot be used as a real exhaust system. There must be at least 7/16” (11mm) of clearance behind the body for this system to install properly without interference with the chassis.

Price:
#73412 Black: $9.95
#73413 Chrome: $11.95