• Intelligent freewheeling technology, greatly improved performance

The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC and further improves the stability and reliability of the ESC.

• Powerful built-in BEC

The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market.

• Efficient cooling system

The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results in an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state.

• Capacitor Thermal Protection

Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damage to the ESC due to overloading.

• Built-in capacitor

Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use.

• High protection level, all-weather operation

The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow, and water without damaging the power unit.

Note: The IP67 protection level mentioned above is splash-resistant, water-resistant, and dust-resistant under normal use, and splash, water, and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product.

Specifications:

• Scale: 1/10^th
• Brushed/Brushless: Brushless
• Sensored/Sensorless: Sensorless
• Waterproof: Waterproof
• /Peak Current: 120A/760A
• Input Voltage: 2S-4S Lipo
• BEC Output: Switch Mode 6V/7.4V @5A
• Wires & Connectors:
  • Input Wires: Black-12AWG-150MMmm*1 / Red--12AWG-150MMmm*1
  • Output Connectors: 4.0mm Gold (female)
• ESC Programing via:
  • SET Button on ESC: Not Supported
  • LED Program Box: Supported
  • LCD G2 Program Box: Supported
  • OTA Programmer: Not Supported
  • Program Port: Separate Program Port
• Firmware Upgrade: Not Supported
• Size & Weight:
  • Size: 52.8*39.8*38.2mm
  • Weight: 119g (Including wires & connectors)
• Applications:
  • Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode)
  • Vehicles: 1/10th Short course truck, Monster truck
  • KV Rating/T Count: 3652?3660 Size Motor