Axial Wraith 4WDS Conversion Set
This 4WDS conversion set includes:
• Universal Swing Shaft (#23014)
• Steering Block (1.5 deg toe-in) (#23004)
• C-Hub (+1 deg camber) (#23012)
• Bearing set
• Parallel Y Cable for servo
• Servo Linkage
In order to convert the axial wraith to a 4WDS system, you need to install this conversion set at the rear of the axial wraith. The C-hub and the steering block should be installed together so now you can steer your rear wheels.
Except this conversion set, the following items are required to purchase separately:
• Rear Offset Axle Link Mount (#23018)
• Steering Linkage (#23003)
• Servo Mount (#23015)
• one extra servo for steering
When you install the steering linkage and the servo on your cars, the back steering system is finally completed. It will make the driving experience differently since you can now allow all four wheels to turn directions. It also provides a better control and the rally performance for the Axial Wraith on rocky surfaces!
ByTim Cheung
Tags :4WDS, Conversion Set, Crawler, Axial, Wraith
Share:http://asiate.es/read?l=ZYWGTV_51RN