The BLS SHV500 servo is designed for R/C Rock Crawlers, but at home in any vehicle. It is powered directly from the battery, eliminating the need for an external BEC! Clean up your wiring, gain space in a tight rig, and enjoy near silent performance with its upgraded brushless motor and circuitry.
FEATURES:
Water-Resistant Alloy Case
O-Ring Seals
All Metal Gears
Brushless Super High Voltage motor
Upgraded N38EH 200c rated magnets
24cm radio lead
24cm 12v power lead with female JST plug and 75mm male JST extension
3s Lipo compatible (16v max)
1 Year Warranty
SPECIFICATIONS:
Weight: 73g
Dimensions: 41x20x40mm
Spline: 25 tooth (Futaba type) M3 threaded
Torque @ 11.1v: 32.4 kg/cm (450 oz/inch)
Speed @ 11.1v: 0.10 sec
Torque @ 14v: 37.5 kg/cm (520 oz/inch)
Speed @ 14v: 0.08 sec
If using an ESC with a power switch, the battery must be disconnected from the ESC when not in use to prevent damage to the servo. Moly (marine) grease is recommended when lubricating the gears. Dielectric grease is recommended on the sensor board if looking to increase water resistance.
Package total weight: 135.00 grams (incl. packaging)
The BLS SHV500 servo is designed for R/C Rock Crawlers, but at home in any vehicle. It is powered directly from the battery, eliminating the need for an external BEC! Clean up your wiring, gain space in a tight rig, and enjoy near silent performance with its upgraded brushless motor and circuitry.
FEATURES:
Water-Resistant Alloy Case
O-Ring Seals
All Metal Gears
Brushless Super High Voltage motor
Upgraded N38EH 200c rated magnets
24cm radio lead
24cm 12v power lead with female JST plug and 75mm male JST extension
3s Lipo compatible (16v max)
1 Year Warranty
SPECIFICATIONS:
Weight: 73g
Dimensions: 41x20x40mm
Spline: 25 tooth (Futaba type) M3 threaded
Torque @ 11.1v: 32.4 kg/cm (450 oz/inch)
Speed @ 11.1v: 0.10 sec
Torque @ 14v: 37.5 kg/cm (520 oz/inch)
Speed @ 14v: 0.08 sec
If using an ESC with a power switch, the battery must be disconnected from the ESC when not in use to prevent damage to the servo. Moly (marine) grease is recommended when lubricating the gears. Dielectric grease is recommended on the sensor board if looking to increase water resistance.
Welcome to Holmes Hobbies. Phone Hours: Our phone support will be unavailable for several hours this morning. If you need assistance. Holmes Hobbies LLC was founded in 2005 by John R. Holmes to provide electronics to the emerging R/C crawler sport. Since then we have grown to becoming an international distributor for Holmes, Tekin, and Castle products. Our primary concern is customer service in motion control electronics, and the products that enable the electric R/C and robotic fields to get the job done.
John Robert Holmes is an MBA graduate of the Trulaske College of Business, and general tinkerer. His interests range from metallurgy to motor design theory, circuit hardware to design for manufacture, bike wheels to classic mopeds. White collar head, blue collar hands.
Welcome to Holmes Hobbies. Phone Hours: Our phone support will be unavailable for several hours this morning. If you need assistance. Holmes Hobbies LLC was founded in 2005 by John R. Holmes to provide electronics to the emerging R/C crawler sport. Since then we have grown to becoming an international distributor for Holmes, Tekin, and Castle products. Our primary concern is customer service in motion control electronics, and the products that enable the electric R/C and robotic fields to get the job done.
John Robert Holmes is an MBA graduate of the Trulaske College of Business, and general tinkerer. His interests range from metallurgy to motor design theory, circuit hardware to design for manufacture, bike wheels to classic mopeds. White collar head, blue collar hands.
ATees.com uses cookies and similar technologies. By using ATees.com, you are agreeing to our revised Privacy Policy and Terms and Conditions, including our Cookie Policy.