SHOP THIS PRODUCT

Available at ATees now is the AD-RC03 3 in 1 system. It has the unique feature that allows you to install L.E.D light, smoke and sound combined into one system. All three units come separately but can be linked to one main control board which only needs a 4 channel transmitter and receiver to operate. This is a bonus as it means you are able to use a gun-style transmitter to operate all three different systems.      

Features:
- Fully remote operated via a 4 channel transmitter basis
- 5V~6V BEC operate
- Channel 3 (VR / 3-step switch / push button) for LED programming to turn on/off LEDs
- Individual RC switch: Night Mode, Hazard Light, Socket A+B, Pilot Mode, Headlight Half Brightness, Parking Light
- Channel 3 or Steering: Auto / Manual Indicators
- Simulation of real vehicle braking, Indicators light effects
- Reverse sound and lights effects are included
- Brake: Normal / Crawler (Brake light will turn ON 3 seconds whenever the throttle resumes to center)
- User Define "ON" Mode: All the user selected LEDs will be turned on after powering up automatically (Default: All off)
- Support channel 4 (push button) for 4 receiver output signals to control AD-RC Smoke, winch (need an extra controller), light bar (with receiver signal decoder) and ESS One+ horn (press and hold on).
- Advanced features of channel 4: flash headlight, clutch mode (activate throttle without movement)
- User friendly setup mode to program Manual Indicators, Crawler Brake, Beep Selection (backward, beep on/off), Throttle Normal/Reverse, Ch4 Remote Toggle/Hold and Ch4-4 Clutch Setting

PACKING Includes:
Main Unit x1
Y-Cable x1
User Manual x1
LED Wire Assembly x10 (1 Wire with 2 LED)
High Power LED x 1 (1 Wire with 2 LED)

AD-RC03 Smoke Unit

FEATURES
- Suitable for RC model vehicle / ship / tank / train
- Fully automatic calibration and remote operated via 1/2/3 channels
- 4 selectable smoke generation rates for various usages
- 2 wired LEDs for flame simulation and status indication
- 5V~6V BEC and an external battery operated
- Selectable external battery voltage 7.2V or 12V
- The smoke chamber is in all-in-one construction
- Built-in overheat protection
- Environmental friendly smoke oil
- Plenty of smoke can last for 6 minutes on max smoke to 15 minutes on min smoke
- Easy to refill
- Perfectly match with AD-RC03 to emit smoke using a 4-channel transmitter

FUNCTIONS
Channel 3 (Optional)
- Highest priority to determine smoke on, off and following throttle
 Channel 1, Steering (Optional)
- 2nd priority to determine smoke on or off
- Turn on / off smoke if CH3 sets to smoke following throttle and throttle is at neutral
Channel 2, Throttle (Compulsory)
- Follow proportional throttle to emit smoke if CH3 sets to smoke following throttle
  Smoke Generation Rate
- 4 rates are selectable by 2 on-board jumpers
Flame Simulation
- 2 flame simulation patterns i.e. follow throttle and random, are selectable by an on-board jumper
Status Indication
- Show operating status via 2 wired LEDs
Overheat Protection
- Automatically stop the heater if overheat occurs.  Then resume to normal after 1 min
Smoke Outlet
- 2 silicon tubes can be used to guide the smoke path

Package Include:
- Main unit
-Smoke Chamber
-Servo Cable
-7mm Outlet Cap x 2
-7mm Silicon tube x 2
-LED Wire Assembly (1 Wire with 2 LED)
-User Manual

Sense ESS-ONE+ Engine Sound Simulation System

To add sound to this AD-RC03 LED 3 in 1 system you will have to use the Sense Innovation ESS-ONE+. ESS-ONE is a high-performance vehicle engine sound simulation system with strong sound-mixing unit, efficient high- power amplifier and a loudspeaker of optimized acoustic design, presenting perfect and realistic simulation effect.

Features:
- ESS-ONE+ uses advanced DNS/DCR algorithm to reproduce the sound of real engines
- Sound output is real time calculated based on the throttle input and throttle movement speed and Combined with current engine speed to make a sound closest to real engine state
- ESS-ONE+ supports AUX channel that can simulate a variety of sounds such as alarm or special sound can be independent controlled by a 3^rd channel on player’s transmitter. Sound like alarm and horn. Please check RCPLUS sound store for detail list
- ESS-ONE+ has two sets of engine sounds pre-installed
- Two engine sounds enables fast switching between the two sounds
- Players can install two different sounds with different break, turbo, and settings into ESS ONE+ and the sound can be easily one button switch
- ESS-ONE+ supports RC PLUS to realize functional setting and sound purchasing from sound stores
- RCPLUS is a software brand under Sense Innovation and mainly provide function settings to players
- The sound store is also integrated into RCPLUS to servo players. In the future the function will be available on mobile device
- ESS-ONE+ supports firmware updates and function upgrades
- RCPLUS provides permanent firmware update service and software iteration
- Users buy Sense Innovative products are equivalent to have a permanent software upgrade service, not only the RC+ software but the ESS firmware have been updating all the time.

Specification:
- Supply voltage range? 5Volts-26Volts
- Speaker Impedance? 4Ohms
- Output power under 4 Ohms? 20W/3S(12V)
- Number of audio channels? One channel 30W max
- Output is Short-Circuit, Overload and Thermally Protected

Main Functions:
- Capable of simulating the sound of engine start, different throttle speeds, shifting, turning-off, braking, turbo and Rev Limiter (users may need to purchase some sounds before usage
- Engine sound replaceable
- ESS-ONE firmware upgrading
- Battery type selection and low voltage alarm
- 9-grade adjustment of volume

 Specification:
- 30W Power Amplifier
- Supply voltage range of amplifier: 5Volts-25Volts
- Speaker impedance: 4 Ohm
- S-Link interface
- Size:94mm*48mm*30.5mm
- Weight: 88.5g
- Output is short-circuit, overload, over-current and thermally protected

You can find the Online Manual if you need more assistance with the RC Plus app.