Currently all feedbacks are left by AsiaTees customers.
PRODUCT INFORMATION:
The shaft for the HK-2213 series helicopter motors measures 4mm in diameter, and is 50.7mm in long. The pinion end of this shaft is ground down to 3.17 mm. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.
Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing. Also, these shafts are 3mm from end to end. The stock shafts are 3.175mm (1/8") on the output end, and 3mm where they go through the bearings. These shafts are offered for people that already have a large number of 3mm pinion gears, and want to swap the motor over to take 3mm pinions.
The shaft for the HK-2213 series helicopter motors measures 4mm in diameter, and is 50.7mm in long. The pinion end of this shaft is ground down to 3.17 mm. The shafts can be cut shorter with a Dremel tool and a cut-off wheel if necessary to fit other motors.
Note: The shafts in the Scorpion motors are a slight press fit into the aluminum front housing. The shafts will not just slide out when the setscrews are removed. They need to be pressed out in a bearing press, or in a drill press, with the front housing of the motor supported in a block of wood to prevent warping the front housing. Also, these shafts are 3mm from end to end. The stock shafts are 3.175mm (1/8") on the output end, and 3mm where they go through the bearings. These shafts are offered for people that already have a large number of 3mm pinion gears, and want to swap the motor over to take 3mm pinions.
Your Quality Brushless Power System Provider Scorpion Systems was created with greatness in mind. Quality electric power systems and parts was the name of the game, and Scorpion is up there at a whole other league. After years of development, Scorpion products were introduced in 2006 to provide the modeling community with reliable and innovative electrical systems to power their models.
With a new state of the art manufacturing facility and engineering center to improve and create their Scorpion motors and ESCs, Scorpion has taken it upon themselves to create even more unique and trustworthy parts for all of your modeling needs.
Your Quality Brushless Power System Provider Scorpion Systems was created with greatness in mind. Quality electric power systems and parts was the name of the game, and Scorpion is up there at a whole other league. After years of development, Scorpion products were introduced in 2006 to provide the modeling community with reliable and innovative electrical systems to power their models.
With a new state of the art manufacturing facility and engineering center to improve and create their Scorpion motors and ESCs, Scorpion has taken it upon themselves to create even more unique and trustworthy parts for all of your modeling needs.
ATees.com uses cookies and similar technologies. By using ATees.com, you are agreeing to our revised Privacy Policy and Terms and Conditions, including our Cookie Policy.
For the month of December, choose FedEx or DHL delivery and take 20% off shipping.