The stands we are introducing today is made of iron metal. From the name you can see it is using lever principle and you can adjust the height under different application. The lowest height is 6cm and and the highest is 9cm. You can adjust the height simply by pulling out its steadying bar or by lifting its manual lever, all easy and simply and time will be saved for upgrading your handsome racer. The claws on the top of the steadying bar are not flat or designed in a simple arch. The claw has been designed in an arch with wavy lines way which makes the whole stand so stable that your car won't move around or even drop when you testing the tires etc.

We know some of our RC friends have been using spare tires as car stands when taking photos. So why exactly we need car stands? You may not believe that there is a big difference between using car stands and not using one, but you will get the idea of why is this big difference.

By using car stands, it will be easier for you to work on the car, especially when you need to take the tires off, change tires, sauce tires and clean tires of course. It will also help with freeing up some space. When there is a problem exists with the wheels or tires, you can put the car on jacks and spin the tires to see what's going on exactly. Don't underestimate the 9cm distance. That distance will allow you to examine your car closer. Even when you trying to listen what's wrong with the motor, the distance will help you a lot since you don't have to hold it up, in which case the holding up gesture may change position of the inner part of the electronics. The last but definitely not the least, for someone who is busy and does not always has time for their cars, the car jack will help keeping the insert foams from developing flat spots, so the long time standing won't ruin the tires.

Do you want to try them out? We have them in two specs – 3 tons and 6 tons. Click the link here to get them --> 3 tons & 6 tons.