MST Releases 1/10 MTX-1 4WD Monster Truck Kit w/ C10 Body

MST releases the high-quality MTX-1 monster truck in 4WD Kit edition. The kit comes with a printed C10 blue body ready to go!

Features:

The whole realistic roll cage for the good exterior and car body is strengthened.
The high-strength aluminum motor mounts have a good heat-sink effect and not deformed in long-time driving.
The new “NS servo saver” can well protect the servo and absorb the impact in cornering.
The full bearing set can reduce the operating resistance and provide better-operating efficiency, and longer operating time.
The high-strength bevel gears have good transmission efficiency and durability.
The differential can compensate for the difference between the speed of the wheels in cornering, stabilize the body dynamics, and let the vehicle corners smoothly and accurately. The high-strength metal differential gears have good transmission efficiency and durability.
The steel CVD drive shaft is good in smooth transmission and better efficiency.
The MTX-1 specific spur gear buffer set comes with the Cush drive rubber blocks to absorb the impact of transmission, avoid the power loss and protection.
The new waterproof receiver box has four channels and comes with the silicon seal ring for water and dustproof.
The MTX-1 specific impact resistance knuckle set and C hubs absorb the impact from the ground and maintain the shaft driving smoothly.
The Realistic 4-link suspension structure will be in the best performance for any terrains.
A realistic big foot tire dedicates with the specific wheel is good in both exterior and performance.
The lightweight and rigid impact-resistant hydraulic shock absorbers can absorb the shocks reacted from the ground, and stable for driving. The spring buckle can be adjusted to the driving demands.
Easily achieve the wheelie effect by the wheelie bar set.
The battery case in the rear side can be installed 2S Lipo batteries and has the quick-release feature. To change the battery quickly by turning the knob.