FlySky iT4S - Easiest 2.4Ghz Pistol Grip Transmitter Ever

The iT4S is FlySky's latest AFHDS-2A system. This 2.4GHz transmitter comes with a newly designed receiver and other telemetry sensors. The interface of the iT4S is incredibly easy. Almost reminiscent of an iPhone's screen, the iT4S has different options like servo reversing, end point/sub-trim adjustments, steering exponential, speed adjustment, steering mix adjustments, throttle exponential/adjustments, and more! It also has ABS Braking Programming. There are a ton of options to use in the iT4S and it's very useful at explaining what each of these functions do.

The transmitter has a 20 model memory for those of you who like to stock up on a lot of cars. It has a race timer, servo moment display, and key programming. It can handle 4 channels and is suitable for cars and boats.

One of the biggest questions we get is how is the iT4S different than their previous version, the iT4. Well, there are a few key differences.

Supports three types of receiver frequencies:AFHDS, 2A/AFHDS, 2/AFHDS; versus two types of receiver frequencies: AFHDS & 2/AFHDS
The hardware used is based on the FS-i10 hardware, compared to the older iT4 hardware.
300m Remote Distance, compared to the previous 200m Remote Distance.
RX can click on status bar to use sensor operations, whereas previous versions only show your RX status
Servo Frequency Can Be Adjusted Within 20-400Hz, whereas before it's fixed to a maximum of 100Hz

Here are some specs for the iT4S:

Specifications:

Channels: 4

Model type: car/boat

RF Range: 2.4055 - 2.475GHz

Bandwidth: 500KHz

RF Channel: 140

RF Power: less than 20 dBm

Modulation type: GFSK

Sticks resolution: 4096

Low voltage warning: less than 3.7V

DSC port: Micro-USB PPM

ST Range: 90 L:45 R:45